Hi, This small series adds the TJA1103 PHY driver.
Changes in v3: - use phy_read_mmd_poll_timeout instead of spin_until_cond - changed the phy name from a generic one to something specific - minor indentation change Changes in v2: - implemented genphy_c45_pma_suspend/genphy_c45_pma_suspend - set default internal delays set to 2ns(90 degrees) - added "VEND1_" prefix to the register definitions - disable rxid in case of txid - disable txid in case of rxid - disable internal delays in rgmii mode - reduced max line length to 80 characters - rebased on top of net-next/master - use genphy_c45_loopback as .set_loopback callback - renamed the driver from nxp-c45 to nxp-c45-tja11xx - used phy phy_set_bits_mmd/phy_clear_bits_mmd instead on phy_write_mmd where I had to set/clear one bit. Radu Pirea (NXP OSS) (2): net: phy: add genphy_c45_pma_suspend/resume phy: nxp-c45: add driver for tja1103 MAINTAINERS | 6 + drivers/net/phy/Kconfig | 6 + drivers/net/phy/Makefile | 1 + drivers/net/phy/nxp-c45-tja11xx.c | 588 ++++++++++++++++++++++++++++++ drivers/net/phy/phy-c45.c | 43 +++ include/linux/phy.h | 2 + 6 files changed, 646 insertions(+) create mode 100644 drivers/net/phy/nxp-c45-tja11xx.c base-commit: 5b489fea977c2b23e26e2f630478da0f4bfdc879 -- 2.31.1
