On Mon, Apr 19, 2021 at 10:18:07AM +0200, Krzysztof Kozlowski wrote:
> Remove trailing whitespaces. No functional change.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlow...@canonical.com>
Both patches applied to drm-misc-next, thanks.
-Daniel
> ---
> drivers/gpu/drm/gma500/backlight.c | 4 +--
> drivers/gpu/drm/gma500/cdv_intel_dp.c | 50 +++++++++++++--------------
> 2 files changed, 26 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/gpu/drm/gma500/backlight.c
> b/drivers/gpu/drm/gma500/backlight.c
> index 35600d070cb5..9e90258541a4 100644
> --- a/drivers/gpu/drm/gma500/backlight.c
> +++ b/drivers/gpu/drm/gma500/backlight.c
> @@ -42,7 +42,7 @@ void gma_backlight_disable(struct drm_device *dev)
> dev_priv->backlight_device->props.brightness = 0;
> do_gma_backlight_set(dev);
> }
> -#endif
> +#endif
> }
>
> void gma_backlight_set(struct drm_device *dev, int v)
> @@ -54,7 +54,7 @@ void gma_backlight_set(struct drm_device *dev, int v)
> dev_priv->backlight_device->props.brightness = v;
> do_gma_backlight_set(dev);
> }
> -#endif
> +#endif
> }
>
> int gma_backlight_init(struct drm_device *dev)
> diff --git a/drivers/gpu/drm/gma500/cdv_intel_dp.c
> b/drivers/gpu/drm/gma500/cdv_intel_dp.c
> index 6d3ada39ff86..595b765ecc71 100644
> --- a/drivers/gpu/drm/gma500/cdv_intel_dp.c
> +++ b/drivers/gpu/drm/gma500/cdv_intel_dp.c
> @@ -245,7 +245,7 @@ i2c_dp_aux_add_bus(struct i2c_adapter *adapter)
> if (W && !in_dbg_master()) msleep(W); \
> } \
> ret__; \
> -})
> +})
>
> #define wait_for(COND, MS) _wait_for(COND, MS, 1)
>
> @@ -386,7 +386,7 @@ static void cdv_intel_edp_panel_vdd_on(struct gma_encoder
> *intel_encoder)
> if (intel_dp->panel_on) {
> DRM_DEBUG_KMS("Skip VDD on because of panel on\n");
> return;
> - }
> + }
> DRM_DEBUG_KMS("\n");
>
> pp = REG_READ(PP_CONTROL);
> @@ -433,7 +433,7 @@ static bool cdv_intel_edp_panel_on(struct gma_encoder
> *intel_encoder)
> DRM_DEBUG_KMS("Error in Powering up eDP panel, status %x\n",
> REG_READ(PP_STATUS));
> intel_dp->panel_on = false;
> } else
> - intel_dp->panel_on = true;
> + intel_dp->panel_on = true;
> msleep(intel_dp->panel_power_up_delay);
>
> return false;
> @@ -449,7 +449,7 @@ static void cdv_intel_edp_panel_off (struct gma_encoder
> *intel_encoder)
>
> pp = REG_READ(PP_CONTROL);
>
> - if ((pp & POWER_TARGET_ON) == 0)
> + if ((pp & POWER_TARGET_ON) == 0)
> return;
>
> intel_dp->panel_on = false;
> @@ -464,7 +464,7 @@ static void cdv_intel_edp_panel_off (struct gma_encoder
> *intel_encoder)
> DRM_DEBUG_KMS("PP_STATUS %x\n", REG_READ(PP_STATUS));
>
> if (wait_for((REG_READ(PP_STATUS) & idle_off_mask) == 0, 1000)) {
> - DRM_DEBUG_KMS("Error in turning off Panel\n");
> + DRM_DEBUG_KMS("Error in turning off Panel\n");
> }
>
> msleep(intel_dp->panel_power_cycle_delay);
> @@ -535,7 +535,7 @@ cdv_intel_dp_mode_valid(struct drm_connector *connector,
> if (cdv_intel_dp_link_required(mode->clock, 24)
> > cdv_intel_dp_max_data_rate(max_link_clock, max_lanes))
> return MODE_CLOCK_HIGH;
> -
> +
> }
> if (mode->clock < 10000)
> return MODE_CLOCK_LOW;
> @@ -606,7 +606,7 @@ cdv_intel_dp_aux_ch(struct gma_encoder *encoder,
> for (i = 0; i < send_bytes; i += 4)
> REG_WRITE(ch_data + i,
> pack_aux(send + i, send_bytes - i));
> -
> +
> /* Send the command and wait for it to complete */
> REG_WRITE(ch_ctl,
> DP_AUX_CH_CTL_SEND_BUSY |
> @@ -623,7 +623,7 @@ cdv_intel_dp_aux_ch(struct gma_encoder *encoder,
> break;
> udelay(100);
> }
> -
> +
> /* Clear done status and any errors */
> REG_WRITE(ch_ctl,
> status |
> @@ -659,7 +659,7 @@ cdv_intel_dp_aux_ch(struct gma_encoder *encoder,
> DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT);
> if (recv_bytes > recv_size)
> recv_bytes = recv_size;
> -
> +
> for (i = 0; i < recv_bytes; i += 4)
> unpack_aux(REG_READ(ch_data + i),
> recv + i, recv_bytes - i);
> @@ -870,7 +870,7 @@ cdv_intel_dp_i2c_init(struct gma_connector *connector,
> ret = i2c_dp_aux_add_bus(&intel_dp->adapter);
> if (is_edp(encoder))
> cdv_intel_edp_panel_vdd_off(encoder);
> -
> +
> return ret;
> }
>
> @@ -1291,13 +1291,13 @@ cdv_intel_get_adjust_train(struct gma_encoder
> *encoder)
> if (this_p > p)
> p = this_p;
> }
> -
> +
> if (v >= CDV_DP_VOLTAGE_MAX)
> v = CDV_DP_VOLTAGE_MAX | DP_TRAIN_MAX_SWING_REACHED;
>
> if (p == DP_TRAIN_PRE_EMPHASIS_MASK)
> p |= DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
> -
> +
> for (lane = 0; lane < 4; lane++)
> intel_dp->train_set[lane] = v | p;
> }
> @@ -1358,7 +1358,6 @@ cdv_intel_dp_set_link_train(struct gma_encoder *encoder,
> uint32_t dp_reg_value,
> uint8_t dp_train_pat)
> {
> -
> struct drm_device *dev = encoder->base.dev;
> int ret;
> struct cdv_intel_dp *intel_dp = encoder->dev_priv;
> @@ -1384,7 +1383,6 @@ static bool
> cdv_intel_dplink_set_level(struct gma_encoder *encoder,
> uint8_t dp_train_pat)
> {
> -
> int ret;
> struct cdv_intel_dp *intel_dp = encoder->dev_priv;
>
> @@ -1462,7 +1460,7 @@ cdv_intel_dp_set_vswing_premph(struct gma_encoder
> *encoder, uint8_t signal_level
> /* ;gfx_dpio_set_reg(0x8124, 0x00004000) */
> index = 2 * premph + 1;
> cdv_sb_write(dev, ddi_reg->PreEmph2, dp_vswing_premph_table[index]);
> - return;
> + return;
> }
>
>
> @@ -1481,8 +1479,8 @@ cdv_intel_dp_start_link_train(struct gma_encoder
> *encoder)
>
> DP |= DP_PORT_EN;
> DP &= ~DP_LINK_TRAIN_MASK;
> -
> - reg = DP;
> +
> + reg = DP;
> reg |= DP_LINK_TRAIN_PAT_1;
> /* Enable output, wait for it to become active */
> REG_WRITE(intel_dp->output_reg, reg);
> @@ -1556,7 +1554,7 @@ cdv_intel_dp_start_link_train(struct gma_encoder
> *encoder)
> if (!clock_recovery) {
> DRM_DEBUG_KMS("failure in DP patter 1 training, train set
> %x\n", intel_dp->train_set[0]);
> }
> -
> +
> intel_dp->DP = DP;
> }
>
> @@ -1747,7 +1745,7 @@ static int cdv_intel_dp_get_modes(struct drm_connector
> *connector)
> if (is_edp(intel_encoder)) {
> struct drm_device *dev = connector->dev;
> struct drm_psb_private *dev_priv = dev->dev_private;
> -
> +
> cdv_intel_edp_panel_vdd_off(intel_encoder);
> if (ret) {
> if (edp && !intel_dp->panel_fixed_mode) {
> @@ -1942,11 +1940,11 @@ static void cdv_disable_intel_clock_gating(struct
> drm_device *dev)
> DPCUNIT_CLOCK_GATE_DISABLE |
> DPLSUNIT_CLOCK_GATE_DISABLE |
> DPOUNIT_CLOCK_GATE_DISABLE |
> - DPIOUNIT_CLOCK_GATE_DISABLE);
> + DPIOUNIT_CLOCK_GATE_DISABLE);
>
> REG_WRITE(DSPCLK_GATE_D, reg_value);
>
> - udelay(500);
> + udelay(500);
> }
>
> void
> @@ -1990,7 +1988,7 @@ cdv_intel_dp_init(struct drm_device *dev, struct
> psb_intel_mode_device *mode_dev
> gma_encoder->dev_priv=intel_dp;
> intel_dp->encoder = gma_encoder;
> intel_dp->output_reg = output_reg;
> -
> +
> drm_encoder_helper_add(encoder, &cdv_intel_dp_helper_funcs);
> drm_connector_helper_add(connector,
> &cdv_intel_dp_connector_helper_funcs);
>
> @@ -2027,7 +2025,7 @@ cdv_intel_dp_init(struct drm_device *dev, struct
> psb_intel_mode_device *mode_dev
> pp_on = REG_READ(PP_CONTROL);
> pp_on &= ~PANEL_UNLOCK_MASK;
> pp_on |= PANEL_UNLOCK_REGS;
> -
> +
> REG_WRITE(PP_CONTROL, pp_on);
>
> pwm_ctrl = REG_READ(BLC_PWM_CTL2);
> @@ -2037,7 +2035,7 @@ cdv_intel_dp_init(struct drm_device *dev, struct
> psb_intel_mode_device *mode_dev
> pp_on = REG_READ(PP_ON_DELAYS);
> pp_off = REG_READ(PP_OFF_DELAYS);
> pp_div = REG_READ(PP_DIVISOR);
> -
> +
> /* Pull timing values out of registers */
> cur.t1_t3 = (pp_on & PANEL_POWER_UP_DELAY_MASK) >>
> PANEL_POWER_UP_DELAY_SHIFT;
> @@ -2085,9 +2083,9 @@ cdv_intel_dp_init(struct drm_device *dev, struct
> psb_intel_mode_device *mode_dev
> goto err_connector;
> } else {
> DRM_DEBUG_KMS("DPCD: Rev=%x LN_Rate=%x LN_CNT=%x
> LN_DOWNSP=%x\n",
> - intel_dp->dpcd[0], intel_dp->dpcd[1],
> + intel_dp->dpcd[0], intel_dp->dpcd[1],
> intel_dp->dpcd[2], intel_dp->dpcd[3]);
> -
> +
> }
> /* The CDV reference driver moves pnale backlight setup into
> the displays that
> have a backlight: this is a good idea and one we should
> probably adopt, however
> --
> 2.25.1
>
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
