On 25/05/2025 20:25, Vincent Knecht via B4 Relay wrote:
From: Vincent Knecht <vincent.kne...@mailoo.org>
The camera subsystem for the MSM8939 is the same as MSM8916 except with
3 CSID instead of 2, and some higher clock rates.
As a quirk, this SoC needs writing values to 2 VFE VBIF registers
(see downstream msm8939-camera.dtsi vbif-{regs,settings} properties).
This fixes black stripes across sensor and garbage in CSID TPG outputs.
Add support for the MSM8939 camera subsystem.
Signed-off-by: Vincent Knecht <vincent.kne...@mailoo.org>
---
drivers/media/platform/qcom/camss/camss-csiphy.c | 1 +
drivers/media/platform/qcom/camss/camss-ispif.c | 8 +-
drivers/media/platform/qcom/camss/camss-vfe-vbif.c | 7 +
drivers/media/platform/qcom/camss/camss-vfe.c | 1 +
drivers/media/platform/qcom/camss/camss.c | 157 +++++++++++++++++++++
drivers/media/platform/qcom/camss/camss.h | 1 +
6 files changed, 173 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/camss-csiphy.c
b/drivers/media/platform/qcom/camss/camss-csiphy.c
index
c622efcc92ff3781d7fc3ace0253c2d64c91e847..6311fc2975aa1345e430a477c8a6476f1d7e5663
100644
--- a/drivers/media/platform/qcom/camss/camss-csiphy.c
+++ b/drivers/media/platform/qcom/camss/camss-csiphy.c
@@ -605,6 +605,7 @@ int msm_csiphy_subdev_init(struct camss *camss,
return PTR_ERR(csiphy->base);
if (camss->res->version == CAMSS_8x16 ||
+ camss->res->version == CAMSS_8x39 ||
camss->res->version == CAMSS_8x53 ||
camss->res->version == CAMSS_8x96) {
csiphy->base_clk_mux =
diff --git a/drivers/media/platform/qcom/camss/camss-ispif.c
b/drivers/media/platform/qcom/camss/camss-ispif.c
index
2dc585c6123dd248a5bacd9c7a88cb5375644311..aaf3caa42d33dcb641651e7f5bc0c2a564d85bfa
100644
--- a/drivers/media/platform/qcom/camss/camss-ispif.c
+++ b/drivers/media/platform/qcom/camss/camss-ispif.c
@@ -1112,6 +1112,8 @@ int msm_ispif_subdev_init(struct camss *camss,
/* Number of ISPIF lines - same as number of CSID hardware modules */
if (camss->res->version == CAMSS_8x16)
ispif->line_num = 2;
+ else if (camss->res->version == CAMSS_8x39)
+ ispif->line_num = 3;
+ .interrupt = { "vfe0" },
+ .vfe = {
+ .line_num = 3,
Hmm should we really be setting line_num inline in the code ?
I don't believe we should.
These parameters should be passed from the resources structures.
---
bod
