From: George Moussalem <[email protected]> Enable nodes required for q6 remoteproc bring up.
Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: George Moussalem <[email protected]> [ Change 'qcom,smem-state-names' order to resolve dt-bindings-check error ] Signed-off-by: Varadarajan Narayanan <[email protected]> --- v8: Swap the order of the items in 'qcom,smem-state-names" to resolve dt-bindings-check error --- arch/arm64/boot/dts/qcom/ipq5018.dtsi | 64 +++++++++++++++++++++++++++ 1 file changed, 64 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi index f024b3cba33f..d077f0ed9e46 100644 --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi @@ -158,6 +158,35 @@ tz_region: tz@4ac00000 { reg = <0x0 0x4ac00000 0x0 0x200000>; no-map; }; + + q6_region: wcss@4b000000 { + no-map; + reg = <0x0 0x4b000000 0x0 0x1b00000>; + }; + }; + + wcss: smp2p-wcss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupt-parent = <&intc>; + interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs_glb 9>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + wcss_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + wcss_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; }; soc: soc@0 { @@ -717,6 +746,41 @@ frame@b128000 { }; }; + q6v5_wcss: remoteproc@cd00000 { + compatible = "qcom,ipq5018-wcss-sec-pil"; + reg = <0x0cd00000 0x10000>; + firmware-name = "ath11k/IPQ5018/hw1.0/q6_fw.mbn"; + interrupts-extended = <&intc GIC_SPI 291 IRQ_TYPE_EDGE_RISING>, + <&wcss_smp2p_in 0 IRQ_TYPE_NONE>, + <&wcss_smp2p_in 1 IRQ_TYPE_NONE>, + <&wcss_smp2p_in 2 IRQ_TYPE_NONE>, + <&wcss_smp2p_in 3 IRQ_TYPE_NONE>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&gcc GCC_SLEEP_CLK_SRC>, + <&gcc GCC_SYS_NOC_WCSS_AHB_CLK>; + clock-names = "sleep", + "interconnect"; + + qcom,smem-states = <&wcss_smp2p_out 1>, + <&wcss_smp2p_out 0>; + qcom,smem-state-names = "stop", + "shutdown"; + + memory-region = <&q6_region>; + + glink-edge { + interrupts = <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>; + label = "rtr"; + qcom,remote-pid = <1>; + mboxes = <&apcs_glb 8>; + }; + }; + pcie1: pcie@80000000 { compatible = "qcom,pcie-ipq5018"; reg = <0x80000000 0xf1d>, -- 2.34.1
