Add the compatible strings for the CCI busses on Milos, and the EEPROMs found on the Fairphone (Gen. 6) camera modules, and add them to the milos dtsi and device dts.
This series soft-depends on https://lore.kernel.org/linux-arm-msm/[email protected]/T/ The patches can be applied without the dependency, but the final dts patches should probably only land once the other series has been fully applied, otherwise the CCI busses cannot actually be used (unless some other component turns on the mmss_noc) and you get a kernel warning like the following: [ 291.055839] ------------[ cut here ]------------ [ 291.055860] cam_cc_camss_top_gdsc status stuck at 'off' [ 291.055878] WARNING: drivers/clk/qcom/gdsc.c:178 at gdsc_toggle_logic+0x138/0x144, CPU#4: hexdump/1995 Signed-off-by: Luca Weiss <[email protected]> --- Luca Weiss (4): dt-bindings: eeprom: at24: Add compatible for Puya P24C128F dt-bindings: i2c: qcom-cci: Document Milos compatible arm64: dts: qcom: milos: Add CCI busses arm64: dts: qcom: milos-fairphone-fp6: Add camera EEPROMs on CCI busses Documentation/devicetree/bindings/eeprom/at24.yaml | 1 + .../devicetree/bindings/i2c/qcom,i2c-cci.yaml | 18 ++ arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts | 50 ++++++ arch/arm64/boot/dts/qcom/milos.dtsi | 194 +++++++++++++++++++++ 4 files changed, 263 insertions(+) --- base-commit: ef1c7b875741bef0ff37ae8ab8a9aaf407dc141c change-id: 20260106-milos-cci-f7f4d8821e87 prerequisite-change-id: 20260116-milos-camcc-icc-d41bdff31ef8:v1 prerequisite-patch-id: fc79344d381fea48318bbf62ce7c16b5687df074 prerequisite-patch-id: 323271b304b98b6ac0e98032f355de26c8e4fa6b prerequisite-patch-id: ba8a70f210c54a14c69a60c26eea22d384b0397f prerequisite-patch-id: de6e7d9f90ce4d8b37342e5198f042edee4b81a4 prerequisite-patch-id: aa3dc6c12366d6574b7e85808fcb107deddb8435 Best regards, -- Luca Weiss <[email protected]>
