On 1/16/26 3:50 PM, Luca Weiss wrote: > Configure and enable the WiFi node, and add the required pinctrl to > provide the sleep clock from the PMK8550 (PMK7635) to WCN6755. > > Thanks to Alexander Koskovich for helping with the bringup, adding > the missing pinctrl to make the WPSS stop crashing. > > Link: > https://lore.kernel.org/linux-arm-msm/[email protected]/ > Signed-off-by: Luca Weiss <[email protected]> > --- > arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts | 19 ++++++++++++++++++- > 1 file changed, 18 insertions(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts > b/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts > index cbe1507b0aaa..75f2b3a3e572 100644 > --- a/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts > +++ b/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts > @@ -232,7 +232,7 @@ wcn6750-pmu { > > clocks = <&rpmhcc RPMH_RF_CLK1>; > > - pinctrl-0 = <&bluetooth_enable_default>; > + pinctrl-0 = <&bluetooth_enable_default>, > <&pmk8550_sleep_clk_default>; > pinctrl-names = "default"; > > regulators { > @@ -704,6 +704,17 @@ &pmiv0104_eusb2_repeater { > qcom,tune-usb2-preem = /bits/ 8 <0x6>; > }; > > +&pmk8550_gpios { > + pmk8550_sleep_clk_default: sleep-clk-default-state { > + pins = "gpio5";
I'm thinking how to best reflect that. Perhaps gpio-gate-clock which would be consumed by the PMU? FWIW PMK8550 can reportedly output this clock from GPIO3 and GPIO5 (not sure if at once) if set to FUNC1 Konrad
