Document the Capella cm36686 ambient light and proximity sensor devicetree
bindings.

Signed-off-by: Erikas Bitovtas <[email protected]>
---
 .../bindings/iio/light/capella,cm36686.yaml        | 74 ++++++++++++++++++++++
 1 file changed, 74 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/light/capella,cm36686.yaml 
b/Documentation/devicetree/bindings/iio/light/capella,cm36686.yaml
new file mode 100644
index 000000000000..5f0a585e3d87
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/capella,cm36686.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/capella,cm36686.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Capella cm36686 I2C Ambient Light and Proximity sensor
+
+maintainers:
+  - Erikas Bitovtas <[email protected]>
+
+properties:
+  compatible:
+    enum:
+      - capella,cm36686
+      - capella,cm36672p
+
+  reg:
+    maxItems: 1
+    description:
+      I2C slave address of the device. Must be 0x60 for both cm36686
+      and cm36672p sensors.
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply:
+    description:
+      Regulator that provides power to the sensor.
+
+  vddio-supply:
+    description:
+      Regulator used to power IO and I2C bus.
+
+  vled-supply:
+    description:
+      Regulator used to power proximity LED
+
+  proximity-near-level: true
+
+  capella,proximity-led-current:
+    description:
+      Current for proximity IR LED (in uA)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [50, 75, 100, 120, 140, 160, 180, 200]
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      light-sensor@60 {
+        compatible = "capella,cm36686";
+        reg = <0x60>;
+
+        vdd-supply = <&pm8916_l8>;
+        vddio-supply = <&pm8916_l6>;
+        vled-supply = <&reg_prox_vled>;
+
+        interrupts-extended = <&tlmm 113 IRQ_TYPE_EDGE_FALLING>;
+
+        proximity-near-level = <30>;
+        capella,proximity-led-current = <100>;
+      };
+    };

-- 
2.52.0


Reply via email to