Qualcomm GX(graphics) is a clock controller which has PLLs, clocks and Power domains (GDSC), but the requirement from the SW driver is to use the GDSC power domain from the clock controller to recover the GPU firmware in case of any failure/hangs. The rest of the resources of the clock controller are being used by the firmware of GPU. This module exposes the GDSC power domains which helps the recovery of Graphics subsystem.
Signed-off-by: Luca Weiss <[email protected]> --- .../bindings/clock/qcom,milos-gxclkctl.yaml | 61 ++++++++++++++++++++++ 1 file changed, 61 insertions(+) diff --git a/Documentation/devicetree/bindings/clock/qcom,milos-gxclkctl.yaml b/Documentation/devicetree/bindings/clock/qcom,milos-gxclkctl.yaml new file mode 100644 index 000000000000..47dc6bb66120 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,milos-gxclkctl.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,milos-gxclkctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Graphics power domain Controller on Milos + +maintainers: + - Luca Weiss <[email protected]> + +description: | + Qualcomm GX(graphics) is a clock controller which has PLLs, clocks and + Power domains (GDSC). This module provides the power domains control + of gxclkctl on Qualcomm SoCs which helps the recovery of Graphics subsystem. + + See also: + include/dt-bindings/clock/qcom,kaanapali-gxclkctl.h + +properties: + compatible: + enum: + - qcom,milos-gxclkctl + + power-domains: + description: + Power domains required for the clock controller to operate + items: + - description: GFX power domain + - description: GPUCC(CX) power domain + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - power-domains + - '#power-domain-cells' + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/power/qcom,rpmhpd.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + + clock-controller@3d64000 { + compatible = "qcom,milos-gxclkctl"; + reg = <0x0 0x03d64000 0x0 0x6000>; + power-domains = <&rpmhpd RPMHPD_GFX>, + <&gpucc 0>; + #power-domain-cells = <1>; + }; + }; +... -- 2.53.0
