Add bindings for pin controller in Milos Low Power Audio SubSystem (LPASS).
Signed-off-by: Luca Weiss <[email protected]> --- .../pinctrl/qcom,milos-lpass-lpi-pinctrl.yaml | 109 +++++++++++++++++++++ 1 file changed, 109 insertions(+) diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,milos-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,milos-lpass-lpi-pinctrl.yaml new file mode 100644 index 000000000000..73e84f188591 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,milos-lpass-lpi-pinctrl.yaml @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,milos-lpass-lpi-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Milos SoC LPASS LPI TLMM + +maintainers: + - Luca Weiss <[email protected]> + +description: + Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem + (LPASS) Low Power Island (LPI) of Qualcomm Milos SoC. + +properties: + compatible: + const: qcom,milos-lpass-lpi-pinctrl + + reg: + items: + - description: LPASS LPI TLMM Control and Status registers + - description: LPASS LPI MCC registers + + clocks: + items: + - description: LPASS Core voting clock + - description: LPASS Audio voting clock + + clock-names: + items: + - const: core + - const: audio + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-milos-lpass-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-milos-lpass-state" + additionalProperties: false + +$defs: + qcom-milos-lpass-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|1[0-9]|2[0-2])$" + + function: + enum: [ dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic3_clk, + dmic3_data, dmic4_clk, dmic4_data, ext_mclk1_a, ext_mclk1_b, + ext_mclk1_c, ext_mclk1_d, ext_mclk1_e, gpio, i2s0_clk, + i2s0_data, i2s0_ws, i2s1_clk, i2s1_data, i2s1_ws, i2s2_clk, + i2s2_data, i2s2_ws, i2s3_clk, i2s3_data, i2s3_ws, qca_swr_clk, + qca_swr_data, slimbus_clk, slimbus_data, swr_rx_clk, + swr_rx_data, swr_tx_clk, swr_tx_data, wsa_swr_clk, + wsa_swr_data ] + description: + Specify the alternative function to be configured for the specified + pins. + +allOf: + - $ref: qcom,lpass-lpi-common.yaml# + +required: + - compatible + - reg + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> + + pinctrl@3440000 { + compatible = "qcom,milos-lpass-lpi-pinctrl"; + reg = <0x03440000 0x20000>, + <0x034d0000 0x10000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 23>; + + clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", + "audio"; + + tx-swr-active-clk-state { + pins = "gpio0"; + function = "swr_tx_clk"; + drive-strength = <4>; + slew-rate = <1>; + bias-disable; + }; + }; -- 2.53.0
