[PATCH] arm64: dts: qcom: Mark l1a regulator as powered during boot

[David Heidelberg via B4 Relay]

From: David Heidelberg <da...@ixit.cz>

This regulator provides for the display subsystem, thus must be on.

Fixes: 77809cf74a8c ("arm64: dts: qcom: Add support for Xiaomi Poco F1 
(Beryllium)")
Signed-off-by: David Heidelberg <da...@ixit.cz>
---
 arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi 
b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
index 01b570d0880d6..1298485c42142 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
@@ -148,6 +148,7 @@ vreg_l1a_0p875: ldo1 {
                        regulator-min-microvolt = <880000>;
                        regulator-max-microvolt = <880000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+                       regulator-boot-on;
                };
 
                vreg_l5a_0p8: ldo5 {

---
base-commit: f90aadf1c67c8b4969d1e5e6d4fd7227adb6e4d7
change-id: 20260312-beryllium-booton-adb218ec7e28

Best regards,
-- 
David Heidelberg <da...@ixit.cz>