Redmi 5A was made by wingtech like Redmi 4A (rolex) and Redmi GO (tiare). They are very similar, make a common base from riva for avoid unnecessary code duplications.
Signed-off-by: Barnabás Czémán <[email protected]> --- arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts | 308 +------------------- .../boot/dts/qcom/msm8917-xiaomi-wingtech.dtsi | 315 +++++++++++++++++++++ 2 files changed, 318 insertions(+), 305 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts b/arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts index 1bfb16f90ddd..4ea4fbdb5ce7 100644 --- a/arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts +++ b/arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts @@ -5,29 +5,14 @@ /dts-v1/; -#include <dt-bindings/arm/qcom,ids.h> -#include <dt-bindings/gpio/gpio.h> -#include "msm8917.dtsi" -#include "pm8937.dtsi" - -/delete-node/ &qseecom_mem; +#include "msm8917-xiaomi-wingtech.dtsi" / { model = "Xiaomi Redmi 5A (riva)"; compatible = "xiaomi,riva", "qcom,msm8917"; - chassis-type = "handset"; - qcom,msm-id = <QCOM_ID_MSM8917 0>; qcom,board-id = <0x1000b 1>, <0x1000b 2>; - pwm_backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pm8937_pwm 0 100000>; - brightness-levels = <0 255>; - num-interpolated-steps = <255>; - default-brightness-level = <128>; - }; - battery: battery { compatible = "simple-battery"; charge-full-design-microamp-hours = <3000000>; @@ -38,96 +23,18 @@ battery: battery { charge-term-current-microamp = <60000>; voltage-min-design-microvolt = <3400000>; }; - - chosen { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - stdout-path = "framebuffer0"; - - framebuffer0: framebuffer@90001000 { - compatible = "simple-framebuffer"; - reg = <0x0 0x90001000 0x0 (720 * 1280 * 3)>; - width = <720>; - height = <1280>; - stride = <(720 * 3)>; - format = "r8g8b8"; - - clocks = <&gcc GCC_MDSS_AHB_CLK>, - <&gcc GCC_MDSS_AXI_CLK>, - <&gcc GCC_MDSS_VSYNC_CLK>, - <&gcc GCC_MDSS_MDP_CLK>, - <&gcc GCC_MDSS_BYTE0_CLK>, - <&gcc GCC_MDSS_PCLK0_CLK>, - <&gcc GCC_MDSS_ESC0_CLK>; - power-domains = <&gcc MDSS_GDSC>; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - - pinctrl-0 = <&gpio_keys_default>; - pinctrl-names = "default"; - - key-volup { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - gpios = <&tlmm 91 GPIO_ACTIVE_LOW>; - debounce-interval = <15>; - }; - }; - - vph_pwr: regulator-vph-pwr { - compatible = "regulator-fixed"; - regulator-name = "vph_pwr"; - regulator-min-microvolt = <3700000>; - regulator-max-microvolt = <3700000>; - regulator-always-on; - regulator-boot-on; - }; - - reserved-memory { - qseecom_mem: qseecom@84a00000 { - reg = <0x0 0x84a00000 0x0 0x1900000>; - no-map; - }; - - framebuffer_mem: memory@90001000 { - reg = <0x0 0x90001000 0x0 (720 * 1280 * 3)>; - no-map; - }; - }; -}; - -&blsp1_i2c3 { - status = "okay"; - - touchscreen@38 { - compatible = "edt,edt-ft5306"; - reg = <0x38>; - interrupts-extended = <&tlmm 65 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; - pinctrl-0 = <&tsp_int_rst_default>; - pinctrl-names = "default"; - vcc-supply = <&pm8937_l10>; - iovcc-supply = <&pm8937_l5>; - touchscreen-size-x = <720>; - touchscreen-size-y = <1280>; - }; }; &blsp2_i2c1 { status = "okay"; - bq27426@55 { + power-monitor@55 { compatible = "ti,bq27426"; reg = <0x55>; monitored-battery = <&battery>; }; - bq25601@6b { + charger@6b { compatible = "ti,bq25601"; reg = <0x6b>; interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>; @@ -139,172 +46,6 @@ bq25601@6b { }; }; -&pm8937_gpios { - pwm_enable_default: pwm-enable-default-state { - pins = "gpio8"; - function = "dtest2"; - output-low; - bias-disable; - qcom,drive-strength = <2>; - }; -}; - -&pm8937_pwm { - pinctrl-0 = <&pwm_enable_default>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&pm8937_resin { - linux,code = <KEY_VOLUMEDOWN>; - - status = "okay"; -}; - -&rpm_requests { - regulators-0 { - compatible = "qcom,rpm-pm8937-regulators"; - - vdd_s1-supply = <&vph_pwr>; - vdd_s2-supply = <&vph_pwr>; - vdd_s3-supply = <&vph_pwr>; - vdd_s4-supply = <&vph_pwr>; - - vdd_l1_l19-supply = <&pm8937_s3>; - vdd_l2_l23-supply = <&pm8937_s3>; - vdd_l3-supply = <&pm8937_s3>; - vdd_l4_l5_l6_l7_l16-supply = <&pm8937_s4>; - vdd_l8_l11_l12_l17_l22-supply = <&vph_pwr>; - vdd_l9_l10_l13_l14_l15_l18-supply = <&vph_pwr>; - - pm8937_s1: s1 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1225000>; - }; - - pm8937_s3: s3 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - }; - - pm8937_s4: s4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - pm8937_l2: l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - pm8937_l5: l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pm8937_l6: l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pm8937_l7: l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pm8937_l8: l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - pm8937_l9: l9 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3300000>; - }; - - pm8937_l10: l10 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <3000000>; - }; - - pm8937_l11: l11 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - pm8937_l12: l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - pm8937_l13: l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - pm8937_l14: l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - pm8937_l15: l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - pm8937_l16: l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pm8937_l17: l17 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2900000>; - }; - - pm8937_l19: l19 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1350000>; - }; - - pm8937_l22: l22 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - pm8937_l23: l23 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - }; - -}; - -&sdhc_1 { - vmmc-supply = <&pm8937_l8>; - vqmmc-supply = <&pm8937_l5>; - - status = "okay"; -}; - -&sdhc_2 { - cd-gpios = <&tlmm 67 GPIO_ACTIVE_LOW>; - vmmc-supply = <&pm8937_l11>; - vqmmc-supply = <&pm8937_l12>; - pinctrl-0 = <&sdc2_default &sdc2_cd_default>; - pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; - pinctrl-names = "default", "sleep"; - - status = "okay"; -}; - -&sleep_clk { - clock-frequency = <32768>; -}; - &tlmm { bq25601_int_default: bq25601-int-default-state { pins = "gpio61"; @@ -312,47 +53,4 @@ bq25601_int_default: bq25601-int-default-state { drive-strength = <2>; bias-pull-up; }; - - gpio_keys_default: gpio-keys-default-state { - pins = "gpio91"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - - sdc2_cd_default: sdc2-cd-default-state { - pins = "gpio67"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - tsp_int_rst_default: tsp-int-rst-default-state { - pins = "gpio64", "gpio65"; - function = "gpio"; - drive-strength = <8>; - bias-pull-up; - }; -}; - -&wcnss { - vddpx-supply = <&pm8937_l5>; - - status = "okay"; -}; - -&wcnss_iris { - compatible = "qcom,wcn3620"; - vddxo-supply = <&pm8937_l7>; - vddrfa-supply = <&pm8937_l19>; - vddpa-supply = <&pm8937_l9>; - vdddig-supply = <&pm8937_l5>; -}; - -&wcnss_mem { - status = "okay"; -}; - -&xo_board { - clock-frequency = <19200000>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8917-xiaomi-wingtech.dtsi b/arch/arm64/boot/dts/qcom/msm8917-xiaomi-wingtech.dtsi new file mode 100644 index 000000000000..714e75de014b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8917-xiaomi-wingtech.dtsi @@ -0,0 +1,315 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2023, Barnabas Czeman + */ + +/dts-v1/; + +#include <dt-bindings/arm/qcom,ids.h> +#include <dt-bindings/gpio/gpio.h> +#include "msm8917.dtsi" +#include "pm8937.dtsi" + +/delete-node/ &qseecom_mem; + +/ { + chassis-type = "handset"; + + qcom,msm-id = <QCOM_ID_MSM8917 0>; + + pwm_backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pm8937_pwm 0 100000>; + brightness-levels = <0 255>; + num-interpolated-steps = <255>; + default-brightness-level = <128>; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer { + compatible = "simple-framebuffer"; + memory-region = <&framebuffer_mem>; + width = <720>; + height = <1280>; + stride = <(720 * 3)>; + format = "r8g8b8"; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + power-domains = <&gcc MDSS_GDSC>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + key-volup { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&tlmm 91 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + }; + }; + + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + regulator-boot-on; + }; + + reserved-memory { + qseecom_mem: qseecom@84a00000 { + reg = <0x0 0x84a00000 0x0 0x1900000>; + no-map; + }; + + framebuffer_mem: memory@90001000 { + reg = <0x0 0x90001000 0x0 (720 * 1280 * 3)>; + no-map; + }; + }; +}; + +&blsp1_i2c3 { + status = "okay"; + + edt_ft5306: touchscreen@38 { + compatible = "edt,edt-ft5306"; + reg = <0x38>; + interrupts-extended = <&tlmm 65 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&tsp_int_rst_default>; + pinctrl-names = "default"; + vcc-supply = <&pm8937_l10>; + iovcc-supply = <&pm8937_l5>; + touchscreen-size-x = <720>; + touchscreen-size-y = <1280>; + + status = "disabled"; + }; +}; + +&pm8937_gpios { + pwm_enable_default: pwm-enable-default-state { + pins = "gpio8"; + function = "dtest2"; + output-low; + bias-disable; + qcom,drive-strength = <2>; + }; +}; + +&pm8937_pwm { + pinctrl-0 = <&pwm_enable_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pm8937_resin { + linux,code = <KEY_VOLUMEDOWN>; + + status = "okay"; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm8937-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + + vdd_l1_l19-supply = <&pm8937_s3>; + vdd_l2_l23-supply = <&pm8937_s3>; + vdd_l3-supply = <&pm8937_s3>; + vdd_l4_l5_l6_l7_l16-supply = <&pm8937_s4>; + vdd_l8_l11_l12_l17_l22-supply = <&vph_pwr>; + vdd_l9_l10_l13_l14_l15_l18-supply = <&vph_pwr>; + + pm8937_s1: s1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1225000>; + }; + + pm8937_s3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pm8937_s4: s4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8937_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8937_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8937_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8937_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8937_l8: l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + pm8937_l9: l9 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pm8937_l10: l10 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + }; + + pm8937_l11: l11 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + pm8937_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8937_l13: l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8937_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8937_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8937_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8937_l17: l17 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2900000>; + }; + + pm8937_l19: l19 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1350000>; + }; + + pm8937_l22: l22 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8937_l23: l23 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8937_l8>; + vqmmc-supply = <&pm8937_l5>; + + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 67 GPIO_ACTIVE_LOW>; + vmmc-supply = <&pm8937_l11>; + vqmmc-supply = <&pm8937_l12>; + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; + pinctrl-names = "default", "sleep"; + + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32768>; +}; + +&tlmm { + gpio_keys_default: gpio-keys-default-state { + pins = "gpio91"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio67"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tsp_int_rst_default: tsp-int-rst-default-state { + pins = "gpio64", "gpio65"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; +}; + +&wcnss { + vddpx-supply = <&pm8937_l5>; + + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; + vddxo-supply = <&pm8937_l7>; + vddrfa-supply = <&pm8937_l19>; + vddpa-supply = <&pm8937_l9>; + vdddig-supply = <&pm8937_l5>; +}; + +&wcnss_mem { + status = "okay"; +}; + +&xo_board { + clock-frequency = <19200000>; +}; -- 2.53.0
