This patch series introduces support for voltage supply, I2C and cathode regulators. This fixes an issue where if a regulator is shared between the proximity sensor and some other device, and the other device is powered off, the proximity sensor would be powered off as well.
One of the commits includes a Reported-by: tag without a Closes: tag - the report was done outside in a Matrix channel. A link to access the report requires sign-in, therefore it was left out. Signed-off-by: Erikas Bitovtas <[email protected]> --- Changes in v5: - Renamed vddio-supply to vio-supply. - Added parentheses to function calls in a variable usage commit message. - Moved the redundant "proximity-near-level" check removal into its own patch. - Link to v4: https://lore.kernel.org/r/[email protected] Changes in v4: - Reworded device tree bindings commit into imperative mood and clarified where do supplies come from. - Moved data->chip_spec->set_power_state() calls from init functions to probe. - Removed explicit less than 0 checks for ret where unnecessary. - Moved the patch that adds regulators to the end of the series. - Added an explanation for removing duplicate prints in probe. - Fixed indentation for devm_regulator_bulk_get_enable() and i2c_smbus writes in vcnl4200_init(). - Removed a redundant check for "proximity-near-level" device property. - Link to v3: https://lore.kernel.org/r/[email protected] Changes in v3: - Added a more detailed description for supplies in the dt-bindings commit. - Separated sorting includes into a commit of its own. - Replaced all occurrences of mutex_init with its device-managed counterpart. - Moved client->dev variable declaration into a commit for adding regulators. - Removed redundant dev_err messages in probe function. - Replaced all direct usages of client->dev and data->client into usages by variable. - Link to v2: https://lore.kernel.org/r/[email protected] Changes in v2: - Removed double quotes in includes. - Reordered includes alphabetically. - Enabled regulators before the mutex is initialized. - Replaced direct usage of &client->dev with a variable. - Link to v1: https://lore.kernel.org/r/[email protected] --- Erikas Bitovtas (8): dt-bindings: iio: light: vcnl4000: add regulators iio: light: vcnl4000: sort includes by their name iio: light: vcnl4000: move power enablement from init to probe iio: light: vcnl4000: replace mutex_init with devm_mutex_init iio: light: vcnl4000: remove error messages for trigger and irq iio: light: vcnl4000: use variables for I2C client and device instances iio: light: vcnl4000: remove redundant check for proximity-near-level iio: light: vcnl4000: add support for regulators .../bindings/iio/light/vishay,vcnl4000.yaml | 7 ++ drivers/iio/light/vcnl4000.c | 90 ++++++++++++---------- 2 files changed, 56 insertions(+), 41 deletions(-) --- base-commit: 8e42d2514a7e8eb8d740d0ba82339dd6c0b6463f change-id: 20260310-vcnl4000-regulators-bcf1b8a01ce6 Best regards, -- Erikas Bitovtas <[email protected]>
