On 19/03/2026 12:58, Erikas Bitovtas wrote: > These sensors can accept 2 supplies - one for the sensor and one for IR > LED [1]. Add supply properties for the sensor - 2 for the sensors and > one external, for their open drain interrupt line, to ensure the sensor > is powered on before proceeding with setup. > > [1] https://www.vishay.com/docs/84274/vcnl4040.pdf > > Reviewed-by: David Lechner <[email protected]> > Signed-off-by: Erikas Bitovtas <[email protected]> > --- > Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml > b/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml > index 2ba4d5de4ec4..44882a90bc76 100644 > --- a/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml > +++ b/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml > @@ -33,6 +33,10 @@ properties: > interrupts: > maxItems: 1 > > + vdd-supply: true > + vio-supply: true
That's still a property of I2C bus controller, but if you disagree then I expect following Rob's comment. https://lore.kernel.org/all/[email protected]/ Best regards, Krzysztof
