Ioana Ciornei <[email protected]> writes:
> Update the ethtool_rmon.sh test so that it uses the KTAP format for its > output. This is achieved by using the helpers found in ktap_helpers.sh. > An example output can be found below. > > $ ./ethtool_rmon.sh endpmac3 endpmac4 > TAP version 13 > 1..14 > ok 1 ethtool_rmon.rx-pkts64to64 > ok 2 ethtool_rmon.rx-pkts65to127 > ok 3 ethtool_rmon.rx-pkts128to255 > ok 4 ethtool_rmon.rx-pkts256to511 > ok 5 ethtool_rmon.rx-pkts512to1023 > ok 6 ethtool_rmon.rx-pkts1024to1518 > ok 7 ethtool_rmon.rx-pkts1519to10240 > ok 8 ethtool_rmon.tx-pkts64to64 > ok 9 ethtool_rmon.tx-pkts65to127 > ok 10 ethtool_rmon.tx-pkts128to255 > ok 11 ethtool_rmon.tx-pkts256to511 > ok 12 ethtool_rmon.tx-pkts512to1023 > ok 13 ethtool_rmon.tx-pkts1024to1518 > ok 14 ethtool_rmon.tx-pkts1519to10240 > # Totals: pass:14 fail:0 xfail:0 xpass:0 skip:0 error:0 > > Signed-off-by: Ioana Ciornei <[email protected]> Reviewed-by: Petr Machata <[email protected]>
