GXCLKCTL (Graphics GX Clock Controller) is a block dedicated to managing clocks for the GPU subsystem on GX power domain. The GX clock controller driver manages only the GX GDSC and the rest of the resources of the controller are managed by the firmware.
We can use the existing kaanapali driver for Milos as well since the GX_CLKCTL_GX_GDSC supported by the Linux driver requires the same configuration. Reviewed-by: Jagadeesh Kona <[email protected]> Reviewed-by: Taniya Das <[email protected]> Signed-off-by: Luca Weiss <[email protected]> --- drivers/clk/qcom/Makefile | 2 +- drivers/clk/qcom/gxclkctl-kaanapali.c | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile index b818fd5af8bf..13e7892ba39a 100644 --- a/drivers/clk/qcom/Makefile +++ b/drivers/clk/qcom/Makefile @@ -187,7 +187,7 @@ obj-$(CONFIG_SM_GPUCC_8450) += gpucc-sm8450.o obj-$(CONFIG_SM_GPUCC_8550) += gpucc-sm8550.o obj-$(CONFIG_SM_GPUCC_8650) += gpucc-sm8650.o obj-$(CONFIG_SM_GPUCC_8750) += gpucc-sm8750.o gxclkctl-kaanapali.o -obj-$(CONFIG_SM_GPUCC_MILOS) += gpucc-milos.o +obj-$(CONFIG_SM_GPUCC_MILOS) += gpucc-milos.o gxclkctl-kaanapali.o obj-$(CONFIG_SM_LPASSCC_6115) += lpasscc-sm6115.o obj-$(CONFIG_SM_TCSRCC_8550) += tcsrcc-sm8550.o obj-$(CONFIG_SM_TCSRCC_8650) += tcsrcc-sm8650.o diff --git a/drivers/clk/qcom/gxclkctl-kaanapali.c b/drivers/clk/qcom/gxclkctl-kaanapali.c index 40d856378a74..7b0af0ba1e68 100644 --- a/drivers/clk/qcom/gxclkctl-kaanapali.c +++ b/drivers/clk/qcom/gxclkctl-kaanapali.c @@ -53,6 +53,7 @@ static const struct qcom_cc_desc gx_clkctl_kaanapali_desc = { static const struct of_device_id gx_clkctl_kaanapali_match_table[] = { { .compatible = "qcom,glymur-gxclkctl" }, { .compatible = "qcom,kaanapali-gxclkctl" }, + { .compatible = "qcom,milos-gxclkctl" }, { .compatible = "qcom,sm8750-gxclkctl" }, { } }; -- 2.53.0
