On Wed, Apr 29, 2026 at 06:55:12PM +0530, Mukesh Ojha wrote:
> On Mon, Apr 27, 2026 at 03:25:53PM +0530, Sumit Garg wrote:
> > From: Sumit Garg <[email protected]>
> >
> > Switch qcom_q6v5_pas client driver over to generic PAS TZ APIs. Generic PAS
> > TZ service allows to support multiple TZ implementation backends like QTEE
> > based SCM PAS service, OP-TEE based PAS service and any further future TZ
> > backend service.
> >
> > Signed-off-by: Sumit Garg <[email protected]>
> > ---
> > drivers/remoteproc/qcom_q6v5_pas.c | 51 +++++++++++++++---------------
> > 1 file changed, 26 insertions(+), 25 deletions(-)
> >
> > diff --git a/drivers/remoteproc/qcom_q6v5_pas.c
> > b/drivers/remoteproc/qcom_q6v5_pas.c
> > index da27d1d3c9da..847249c28c1b 100644
> > --- a/drivers/remoteproc/qcom_q6v5_pas.c
> > +++ b/drivers/remoteproc/qcom_q6v5_pas.c
> > @@ -20,6 +20,7 @@
> > #include <linux/platform_device.h>
> > #include <linux/pm_domain.h>
> > #include <linux/pm_runtime.h>
> > +#include <linux/firmware/qcom/qcom_pas.h>
> > #include <linux/firmware/qcom/qcom_scm.h>
>
> Can you check do we really need this header ?
Yeah it's needed for qcom_scm_assign_mem() API.
>
> > #include <linux/regulator/consumer.h>
> > #include <linux/remoteproc.h>
> > @@ -118,8 +119,8 @@ struct qcom_pas {
> > struct qcom_rproc_ssr ssr_subdev;
> > struct qcom_sysmon *sysmon;
> >
> > - struct qcom_scm_pas_context *pas_ctx;
> > - struct qcom_scm_pas_context *dtb_pas_ctx;
> > + struct qcom_pas_context *pas_ctx;
> > + struct qcom_pas_context *dtb_pas_ctx;
> > };
> >
> > static void qcom_pas_segment_dump(struct rproc *rproc,
> > @@ -196,7 +197,7 @@ static int qcom_pas_shutdown_poll_decrypt(struct
> > qcom_pas *pas)
> >
> > do {
> > msleep(QCOM_PAS_DECRYPT_SHUTDOWN_DELAY_MS);
> > - ret = qcom_scm_pas_shutdown(pas->pas_id);
> > + ret = qcom_pas_shutdown(pas->pas_id);
> > } while (ret == -EINVAL && --retry_num);
> >
> > return ret;
> > @@ -212,9 +213,9 @@ static int qcom_pas_unprepare(struct rproc *rproc)
> > * auth_and_reset() was successful, but in other cases clean it up
> > * here.
> > */
> > - qcom_scm_pas_metadata_release(pas->pas_ctx);
> > + qcom_pas_metadata_release(pas->pas_ctx);
> > if (pas->dtb_pas_id)
> > - qcom_scm_pas_metadata_release(pas->dtb_pas_ctx);
> > + qcom_pas_metadata_release(pas->dtb_pas_ctx);
> >
> > return 0;
> > }
> > @@ -228,9 +229,9 @@ static int qcom_pas_load(struct rproc *rproc, const
> > struct firmware *fw)
> > pas->firmware = fw;
> >
> > if (pas->lite_pas_id)
> > - qcom_scm_pas_shutdown(pas->lite_pas_id);
> > + qcom_pas_shutdown(pas->lite_pas_id);
> > if (pas->lite_dtb_pas_id)
> > - qcom_scm_pas_shutdown(pas->lite_dtb_pas_id);
> > + qcom_pas_shutdown(pas->lite_dtb_pas_id);
> >
> > if (pas->dtb_pas_id) {
> > ret = request_firmware(&pas->dtb_firmware,
> > pas->dtb_firmware_name, pas->dev);
> > @@ -250,7 +251,7 @@ static int qcom_pas_load(struct rproc *rproc, const
> > struct firmware *fw)
> > return 0;
> >
> > release_dtb_metadata:
> > - qcom_scm_pas_metadata_release(pas->dtb_pas_ctx);
> > + qcom_pas_metadata_release(pas->dtb_pas_ctx);
> > release_firmware(pas->dtb_firmware);
> >
> > return ret;
> > @@ -310,7 +311,7 @@ static int qcom_pas_start(struct rproc *rproc)
> > if (ret)
> > goto disable_px_supply;
> >
> > - ret = qcom_scm_pas_prepare_and_auth_reset(pas->dtb_pas_ctx);
> > + ret = qcom_pas_prepare_and_auth_reset(pas->dtb_pas_ctx);
> > if (ret) {
> > dev_err(pas->dev,
> > "failed to authenticate dtb image and release
> > reset\n");
> > @@ -329,7 +330,7 @@ static int qcom_pas_start(struct rproc *rproc)
> > if (ret)
> > goto release_pas_metadata;
> >
> > - ret = qcom_scm_pas_prepare_and_auth_reset(pas->pas_ctx);
> > + ret = qcom_pas_prepare_and_auth_reset(pas->pas_ctx);
> > if (ret) {
> > dev_err(pas->dev,
> > "failed to authenticate image and release reset\n");
> > @@ -339,13 +340,13 @@ static int qcom_pas_start(struct rproc *rproc)
> > ret = qcom_q6v5_wait_for_start(&pas->q6v5, msecs_to_jiffies(5000));
> > if (ret == -ETIMEDOUT) {
> > dev_err(pas->dev, "start timed out\n");
> > - qcom_scm_pas_shutdown(pas->pas_id);
> > + qcom_pas_shutdown(pas->pas_id);
> > goto unmap_carveout;
> > }
> >
> > - qcom_scm_pas_metadata_release(pas->pas_ctx);
> > + qcom_pas_metadata_release(pas->pas_ctx);
> > if (pas->dtb_pas_id)
> > - qcom_scm_pas_metadata_release(pas->dtb_pas_ctx);
> > + qcom_pas_metadata_release(pas->dtb_pas_ctx);
> >
> > /* firmware is used to pass reference from qcom_pas_start(), drop it
> > now */
> > pas->firmware = NULL;
> > @@ -355,9 +356,9 @@ static int qcom_pas_start(struct rproc *rproc)
> > unmap_carveout:
> > qcom_pas_unmap_carveout(rproc, pas->mem_phys, pas->mem_size);
> > release_pas_metadata:
> > - qcom_scm_pas_metadata_release(pas->pas_ctx);
> > + qcom_pas_metadata_release(pas->pas_ctx);
> > if (pas->dtb_pas_id)
> > - qcom_scm_pas_metadata_release(pas->dtb_pas_ctx);
> > + qcom_pas_metadata_release(pas->dtb_pas_ctx);
> >
> > unmap_dtb_carveout:
> > if (pas->dtb_pas_id)
> > @@ -406,7 +407,7 @@ static int qcom_pas_stop(struct rproc *rproc)
> > if (ret == -ETIMEDOUT)
> > dev_err(pas->dev, "timed out on wait\n");
> >
> > - ret = qcom_scm_pas_shutdown(pas->pas_id);
> > + ret = qcom_pas_shutdown(pas->pas_id);
> > if (ret && pas->decrypt_shutdown)
> > ret = qcom_pas_shutdown_poll_decrypt(pas);
> >
> > @@ -414,7 +415,7 @@ static int qcom_pas_stop(struct rproc *rproc)
> > dev_err(pas->dev, "failed to shutdown: %d\n", ret);
> >
> > if (pas->dtb_pas_id) {
> > - ret = qcom_scm_pas_shutdown(pas->dtb_pas_id);
> > + ret = qcom_pas_shutdown(pas->dtb_pas_id);
> > if (ret)
> > dev_err(pas->dev, "failed to shutdown dtb: %d\n", ret);
> >
> > @@ -484,11 +485,11 @@ static int qcom_pas_parse_firmware(struct rproc
> > *rproc, const struct firmware *f
> > *
> > * Here, we call rproc_elf_load_rsc_table() to check firmware binary
> > has resources
> > * or not and if it is not having then we pass NULL and zero as input
> > resource
> > - * table pointer and size respectively to the argument of
> > qcom_scm_pas_get_rsc_table()
> > + * table pointer and size respectively to the argument of
> > qcom_pas_get_rsc_table()
> > * and this is even true for Qualcomm remote processor who does follow
> > remoteproc
> > * framework.
> > */
> > - output_rt = qcom_scm_pas_get_rsc_table(pas->pas_ctx, table, table_sz,
> > &output_rt_size);
> > + output_rt = qcom_pas_get_rsc_table(pas->pas_ctx, table, table_sz,
> > &output_rt_size);
> > ret = IS_ERR(output_rt) ? PTR_ERR(output_rt) : 0;
> > if (ret) {
> > dev_err(pas->dev, "Error in getting resource table: %d\n", ret);
> > @@ -746,7 +747,7 @@ static int qcom_pas_probe(struct platform_device *pdev)
> > if (!desc)
> > return -EINVAL;
> >
> > - if (!qcom_scm_is_available())
> > + if (!qcom_pas_is_available())
> > return -EPROBE_DEFER;
> >
> > fw_name = desc->firmware_name;
> > @@ -838,16 +839,16 @@ static int qcom_pas_probe(struct platform_device
> > *pdev)
> >
> > qcom_add_ssr_subdev(rproc, &pas->ssr_subdev, desc->ssr_name);
> >
> > - pas->pas_ctx = devm_qcom_scm_pas_context_alloc(pas->dev, pas->pas_id,
> > - pas->mem_phys,
> > pas->mem_size);
> > + pas->pas_ctx = devm_qcom_pas_context_alloc(pas->dev, pas->pas_id,
> > + pas->mem_phys,
> > pas->mem_size);
> > if (IS_ERR(pas->pas_ctx)) {
> > ret = PTR_ERR(pas->pas_ctx);
> > goto remove_ssr_sysmon;
> > }
> >
> > - pas->dtb_pas_ctx = devm_qcom_scm_pas_context_alloc(pas->dev,
> > pas->dtb_pas_id,
> > - pas->dtb_mem_phys,
> > - pas->dtb_mem_size);
> > + pas->dtb_pas_ctx = devm_qcom_pas_context_alloc(pas->dev,
> > pas->dtb_pas_id,
> > + pas->dtb_mem_phys,
> > + pas->dtb_mem_size);
> > if (IS_ERR(pas->dtb_pas_ctx)) {
> > ret = PTR_ERR(pas->dtb_pas_ctx);
> > goto remove_ssr_sysmon;
> > --
> > 2.51.0
> >
>
> Reviewed-by: Mukesh Ojha <[email protected]>
Thanks.
-Sumit
