Enhance vlmc_query_intvl_test and vlmc_query_response_intvl_test in bridge_vlan_mcast.sh to validate IGMPv3/MLDv2 protocol compliance for MRC and QQIC field encoding across both linear and exponential ranges.
TEST: Vlan multicast snooping enable [ OK ] TEST: Vlan mcast_query_interval global option default value [ OK ] TEST: Number of tagged IGMPv2 general query [ OK ] TEST: IGMPv3 QQIC linear value 60(s) [ OK ] TEST: MLDv2 QQIC linear value 60(s) [ OK ] TEST: IGMPv3 QQIC non linear value 160(s) [ OK ] TEST: MLDv2 QQIC non linear value 160(s) [ OK ] TEST: Vlan mcast_query_response_interval global option default value [ OK ] TEST: IGMPv3 MRC linear value of 60(x0.1s) [ OK ] TEST: MLDv2 MRC linear value of 24000(ms) [ OK ] TEST: IGMPv3 MRC non linear value of 240(x0.1s) [ OK ] TEST: MLDv2 MRC non linear value of 48000(ms) [ OK ] Reviewed-by: Nikolay Aleksandrov <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Signed-off-by: Ujjal Roy <[email protected]> --- .../net/forwarding/bridge_vlan_mcast.sh | 140 +++++++++++++++++- 1 file changed, 132 insertions(+), 8 deletions(-) diff --git a/tools/testing/selftests/net/forwarding/bridge_vlan_mcast.sh b/tools/testing/selftests/net/forwarding/bridge_vlan_mcast.sh index e8031f68200a..07a377652a59 100755 --- a/tools/testing/selftests/net/forwarding/bridge_vlan_mcast.sh +++ b/tools/testing/selftests/net/forwarding/bridge_vlan_mcast.sh @@ -162,14 +162,27 @@ vlmc_query_cnt_setup() { local type=$1 local dev=$2 + local match=($3) if [[ $type == "igmp" ]]; then - tc filter add dev $dev egress pref 10 prot 802.1Q \ + # This matches: IP Protocol 2 (IGMP) + tc filter add dev "$dev" egress pref 10 prot 802.1Q \ flower vlan_id 10 vlan_ethtype ipv4 dst_ip 224.0.0.1 ip_proto 2 \ + action goto chain 1 + # AND Type 0x11 (Query) at offset 0 of IGMP header + # 20 bytes IPv4 header + 4 bytes Router Alert option + IGMP[offset 0] + tc filter add dev "$dev" egress pref 20 chain 1 prot 802.1Q u32 \ + match u8 0x11 0xff at 24 "${match[@]}" \ action pass else - tc filter add dev $dev egress pref 10 prot 802.1Q \ + # This matches: ICMPv6 + tc filter add dev "$dev" egress pref 10 prot 802.1Q \ flower vlan_id 10 vlan_ethtype ipv6 dst_ip ff02::1 ip_proto icmpv6 \ + action goto chain 1 + # AND Type 0x82 (Query) at offset 0 of MLD header + # 40 bytes IPv6 header + 8 bytes Hop-by-hop option + MLD[offset 0] + tc filter add dev "$dev" egress pref 20 chain 1 prot 802.1Q u32 \ + match u8 0x82 0xff at 48 "${match[@]}" \ action pass fi @@ -181,7 +194,39 @@ vlmc_query_cnt_cleanup() local dev=$1 ip link set dev br0 type bridge mcast_stats_enabled 0 - tc filter del dev $dev egress pref 10 + tc filter del dev "$dev" egress pref 20 chain 1 + tc filter del dev "$dev" egress pref 10 +} + +vlmc_query_get_intvl_match() +{ + local type=$1 + local version=$2 + local test=$3 + local enc_val=$4 + + if [ "$test" = "qqic" ]; then + # QQIC is 8-bit floating point encoding for IGMPv3 and MLDv2 + if [ "${type}v${version}" = "igmpv3" ]; then + # QQIC is at offset 9 of IGMP header + # 20 bytes IPv4 header + 4 bytes Router Alert option + IGMP[offset 9] + echo "match u8 $enc_val 0xff at 33" + elif [ "${type}v${version}" = "mldv2" ]; then + # QQIC is at offset 25 of MLD header + # 40 bytes IPv6 header + 8 bytes Hop-by-hop option + MLD[offset 25] + echo "match u8 $enc_val 0xff at 73" + fi + elif [ "$test" = "mrc" ]; then + if [ "${type}v${version}" = "igmpv3" ]; then + # MRC is 8-bit floating point encoding at offset 1 of IGMP header + # 20 bytes IPv4 header + 4 bytes Router Alert option + IGMP[offset 1] + echo "match u8 $enc_val 0xff at 25" + elif [ "${type}v${version}" = "mldv2" ]; then + # MRC is 16-bit floating point encoding at offset 4 of MLD header + # 40 bytes IPv6 header + 8 bytes Hop-by-hop option + MLD[offset 4] + echo "match u16 $enc_val 0xffff at 52" + fi + fi } vlmc_check_query() @@ -191,9 +236,13 @@ vlmc_check_query() local dev=$3 local expect=$4 local time=$5 + local test=$6 + local enc_val=$7 + local intvl_match="" local ret=0 - vlmc_query_cnt_setup $type $dev + intvl_match="$(vlmc_query_get_intvl_match "$type" "$version" "$test" "$enc_val")" + vlmc_query_cnt_setup "$type" "$dev" "$intvl_match" local pre_tx_xstats=$(vlmc_query_cnt_xstats $type $version $dev) bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_querier 1 @@ -201,7 +250,7 @@ vlmc_check_query() if [[ $ret -eq 0 ]]; then sleep $time - local tcstats=$(tc_rule_stats_get $dev 10 egress) + local tcstats=$(tc_rule_stats_get "$dev" 20 egress) local post_tx_xstats=$(vlmc_query_cnt_xstats $type $version $dev) if [[ $tcstats != $expect || \ @@ -448,8 +497,46 @@ vlmc_query_intvl_test() # 1 is sent immediately, then 2 more in the next 5 seconds vlmc_check_query igmp 2 $swp1 3 5 check_err $? "Wrong number of tagged IGMPv2 general queries sent" - log_test "Vlan 10 mcast_query_interval option changed to 200" + log_test "Number of tagged IGMPv2 general query" + + RET=0 + bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_igmp_version 3 + check_err $? "Could not set mcast_igmp_version in vlan 10" + bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_mld_version 2 + check_err $? "Could not set mcast_mld_version in vlan 10" + bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_query_interval 6000 + check_err $? "Could not set mcast_query_interval in vlan 10" + # 1 is sent immediately, IGMPv3 QQIC should match with linear value 60 (0x3c) + # which is 8-bit encoded value of 60 [units of seconds] + vlmc_check_query igmp 3 $swp1 1 1 qqic 0x3c + check_err $? "Wrong QQIC in generated IGMPv3 general queries" + log_test "IGMPv3 QQIC linear value 60(s)" + + RET=0 + # 1 is sent immediately, MLDv2 QQIC should match with linear value 60 (0x3c) + # which is 8-bit encoded value of 60 [units of seconds] + vlmc_check_query mld 2 $swp1 1 1 qqic 0x3c + check_err $? "Wrong QQIC in generated MLDv2 general queries" + log_test "MLDv2 QQIC linear value 60(s)" + + RET=0 + bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_query_interval 16000 + check_err $? "Could not set mcast_query_interval in vlan 10" + # 1 is sent immediately, IGMPv3 QQIC should match with non linear value 132 (0x84) + # which is 8-bit encoded value of 160 [units of seconds] + vlmc_check_query igmp 3 $swp1 1 1 qqic 0x84 + check_err $? "Wrong QQIC in generated IGMPv3 general queries" + log_test "IGMPv3 QQIC non linear value 160(s)" + RET=0 + # 1 is sent immediately, MLDv2 QQIC should match with non linear value 132 (0x84) + # which is 8-bit encoded value of 160 [units of seconds] + vlmc_check_query mld 2 $swp1 1 1 qqic 0x84 + check_err $? "Wrong QQIC in generated MLDv2 general queries" + log_test "MLDv2 QQIC non linear value 160(s)" + + bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_igmp_version 2 + bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_mld_version 1 bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_startup_query_count 2 bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_query_interval 12500 } @@ -469,10 +556,47 @@ vlmc_query_response_intvl_test() log_test "Vlan mcast_query_response_interval global option default value" RET=0 - bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_query_response_interval 200 + bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_startup_query_count 0 + bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_igmp_version 3 + check_err $? "Could not set mcast_igmp_version in vlan 10" + bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_mld_version 2 + check_err $? "Could not set mcast_mld_version in vlan 10" + bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_query_response_interval 600 + check_err $? "Could not set mcast_query_response_interval in vlan 10" + # 1 is sent immediately, IGMPv3 MRC should match with linear value 60 (0x3c) + # which is 8-bit encoded value of 60 [units of 0.1s = 6 seconds] + vlmc_check_query igmp 3 $swp1 1 1 mrc 0x3c + check_err $? "Wrong MRC in generated IGMPv3 general queries" + log_test "IGMPv3 MRC linear value of 60(x0.1s)" + + RET=0 + bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_query_response_interval 2400 + check_err $? "Could not set mcast_query_response_interval in vlan 10" + # 1 is sent immediately, MLDv2 MRC should match with linear value 0x5dc0 (24000) + # which is 16-bit encoded value of 24000 [units of ms / 24 seconds] + vlmc_check_query mld 2 $swp1 1 1 mrc 0x5dc0 + check_err $? "Wrong MRC in generated MLDv2 general queries" + log_test "MLDv2 MRC linear value of 24000(ms)" + + RET=0 + # 1 is sent immediately, IGMPv3 MRC should match with non linear value 142 (0x8e) + # which is 8-bit encoded value of 240 [units of 0.1s = 24 seconds] + vlmc_check_query igmp 3 $swp1 1 1 mrc 0x8e + check_err $? "Wrong MRC in generated IGMPv3 general queries" + log_test "IGMPv3 MRC non linear value of 240(x0.1s)" + + RET=0 + bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_query_response_interval 4800 check_err $? "Could not set mcast_query_response_interval in vlan 10" - log_test "Vlan 10 mcast_query_response_interval option changed to 200" + # 1 is sent immediately, MLDv2 MRC should match with non linear value 0x8770 (34672) + # which is 16-bit encoded value of 48000 [units of ms / 48 seconds] + vlmc_check_query mld 2 $swp1 1 1 mrc 0x8770 + check_err $? "Wrong MRC in generated MLDv2 general queries" + log_test "MLDv2 MRC non linear value of 48000(ms)" + bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_igmp_version 2 + bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_mld_version 1 + bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_startup_query_count 2 bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_query_response_interval 1000 } -- 2.43.0
