On different boards the cameras are connected to different pins with the cam_mclk function. Add the definitions so that mclk0-5 are covered.
Signed-off-by: Luca Weiss <[email protected]> --- arch/arm64/boot/dts/qcom/kodiak.dtsi | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/kodiak.dtsi b/arch/arm64/boot/dts/qcom/kodiak.dtsi index 62daef726d32..903937947811 100644 --- a/arch/arm64/boot/dts/qcom/kodiak.dtsi +++ b/arch/arm64/boot/dts/qcom/kodiak.dtsi @@ -6505,6 +6505,27 @@ qup_uart15_rx: qup-uart15-rx-state { function = "qup17"; }; + cam_mclk0_default: cam-mclk0-default-state { + pins = "gpio64"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + cam_mclk1_default: cam-mclk1-default-state { + pins = "gpio65"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + cam_mclk2_default: cam-mclk2-default-state { + pins = "gpio66"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + cam_mclk3_default: cam-mclk3-default-state { pins = "gpio67"; function = "cam_mclk"; @@ -6512,6 +6533,13 @@ cam_mclk3_default: cam-mclk3-default-state { bias-disable; }; + cam_mclk4_default: cam-mclk4-default-state { + pins = "gpio68"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + cci0_default: cci0-default-state { pins = "gpio69", "gpio70"; function = "cci_i2c"; @@ -6578,6 +6606,13 @@ pcie0_clkreq_n: pcie0-clkreq-n-state { function = "pcie0_clkreqn"; }; + cam_mclk5_default: cam-mclk5-default-state { + pins = "gpio93"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + mi2s0_mclk: mi2s0-mclk-state { pins = "gpio96"; function = "pri_mi2s"; -- 2.54.0
