On 6/12/26 13:55, Luca Weiss wrote:
On different boards the cameras are connected to different pins with the
cam_mclk function. Add the definitions so that mclk0-5 are covered.
Signed-off-by: Luca Weiss <[email protected]>
---
arch/arm64/boot/dts/qcom/kodiak.dtsi | 35 +++++++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/kodiak.dtsi
b/arch/arm64/boot/dts/qcom/kodiak.dtsi
index 62daef726d32..903937947811 100644
--- a/arch/arm64/boot/dts/qcom/kodiak.dtsi
+++ b/arch/arm64/boot/dts/qcom/kodiak.dtsi
@@ -6505,6 +6505,27 @@ qup_uart15_rx: qup-uart15-rx-state {
function = "qup17";
};
+ cam_mclk0_default: cam-mclk0-default-state {
+ pins = "gpio64";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ cam_mclk1_default: cam-mclk1-default-state {
+ pins = "gpio65";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ cam_mclk2_default: cam-mclk2-default-state {
+ pins = "gpio66";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
cam_mclk3_default: cam-mclk3-default-state {
pins = "gpio67";
function = "cam_mclk";
@@ -6512,6 +6533,13 @@ cam_mclk3_default: cam-mclk3-default-state {
bias-disable;
};
+ cam_mclk4_default: cam-mclk4-default-state {
+ pins = "gpio68";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
cci0_default: cci0-default-state {
pins = "gpio69", "gpio70";
function = "cci_i2c";
@@ -6578,6 +6606,13 @@ pcie0_clkreq_n: pcie0-clkreq-n-state {
function = "pcie0_clkreqn";
};
+ cam_mclk5_default: cam-mclk5-default-state {
+ pins = "gpio93";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
mi2s0_mclk: mi2s0-mclk-state {
pins = "gpio96";
function = "pri_mi2s";
Reviewed-by: Vladimir Zapolskiy <[email protected]>
--
Best wishes,
Vladimir
