On Tue, 23 Jun 2026 11:55:52 +0100 Rodrigo Alencar via B4 Relay <[email protected]> wrote:
> From: Rodrigo Alencar <[email protected]> > > Most of the supported devices rely on a GAIN pin to control a 2x > multiplier applied to the output voltage. Other devices, e.g. the > single-channel ones, provides a gain control through a bit field in > the control register. Some designs might have the GAIN pin hardwired > to VDD/VLOGIC or GND, which would have no "gain-gpios" device property, > being able to set "adi,range-double" if it is hardwired to VDD. The > vref_mv field is moved down in the struct ad5686_state, so that the > overall size increase is reduced. > > Signed-off-by: Rodrigo Alencar <[email protected]> The rest of this series looks good to me. Let's see what others think. Take a quick look at the sashiko feedback (much of it is invalid stuff about the supplies being added) just to check there is nothing there. There be16 one might be real though I'm not sure the channels are actually marked as IIO_BE - maybe I'm missing something, Thanks, Jonathan
