From: George Moussalem <[email protected]>

Document the Qualcomm IPQ5018 Bluetooth controller.

Signed-off-by: George Moussalem <[email protected]>
---
 .../bindings/net/bluetooth/qcom,ipq5018-bt.yaml    | 63 ++++++++++++++++++++++
 1 file changed, 63 insertions(+)

diff --git 
a/Documentation/devicetree/bindings/net/bluetooth/qcom,ipq5018-bt.yaml 
b/Documentation/devicetree/bindings/net/bluetooth/qcom,ipq5018-bt.yaml
new file mode 100644
index 000000000000..afd33f851858
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/bluetooth/qcom,ipq5018-bt.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/bluetooth/qcom,ipq5018-bt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm IPQ5018 Bluetooth
+
+maintainers:
+  - George Moussalem <[email protected]>
+
+properties:
+  compatible:
+    enum:
+      - qcom,ipq5018-bt
+
+  interrupts:
+    items:
+      - description:
+          Interrupt line from the M0 Bluetooth Subsystem to the host processor
+          to notify it of events such as re
+
+  qcom,ipc:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to a syscon node representing the APCS 
registers
+          - description: u32 representing offset to the register within the 
syscon
+          - description: u32 representing the ipc bit within the register
+    description: |
+      These entries specify the outgoing IPC bit used for signaling the remote
+      M0 BTSS core of a host event or for sending an ACK if the remote 
processor
+      expects it.
+
+  qcom,rproc:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the remote processor node representing the M0 BTSS core.
+
+required:
+  - compatible
+  - interrupts
+  - qcom,ipc
+  - qcom,rproc
+
+allOf:
+  - $ref: bluetooth-controller.yaml#
+  - $ref: qcom,bluetooth-common.yaml
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    bluetooth: bluetooth {
+      compatible = "qcom,ipq5018-bt";
+
+      qcom,ipc = <&apcs_glb 8 23>;
+      interrupts = <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>;
+
+      qcom,rproc = <&m0_btss>;
+    };

-- 
2.53.0



Reply via email to