On Mon, Jul 06, 2026 at 03:38:42PM +0200, Konrad Dybcio wrote:
> On 7/4/26 10:55 AM, Erikas Bitovtas wrote:
> >>> +&usb_1_dwc3 {
> >>> + dr_mode = "peripheral";
> >>> + maximum-speed = "high-speed";
> >>
> >> Does super-speed not work (if you also remove the qcom,select... above)?
> >>
> >> Konrad
> >
> > I can make a file transfer over scp, but the speed is inconsistent and
> > slower than with high-speed. Must be because this device does not
> > support USB 3.0 (super-speed).
>
> I'm asking whether it enumerates as super-speed if you make the changes
> I referred to and use a super-speed cable.
>
> Some devices wouldn't, because not all manufacturers connect the
> necessary TX/RX lines on the Type-C port.
the GSM arena lists those phones as having USB 2.0 only.
--
With best wishes
Dmitry
