This one's also from Jordan.

>From dea8d19f689706985b30be745ef1151082866374 Mon Sep 17 00:00:00 2001
From: Jordan Crouse <[EMAIL PROTECTED]>
Date: Fri, 22 Feb 2008 19:55:09 -0500
Subject: [PATCH] gxfb: Don't enable the CRT DACs when we are in flatpanel mode

When the FP strap is enabled, don't turn on the CRT DACs - that will save
about 35 mA of power.

Updated/cleaned up by Andres Salomon.

Signed-off-by: Andres Salomon <[EMAIL PROTECTED]>
Acked-by: Jordan Crouse <[EMAIL PROTECTED]>
---
 drivers/video/geode/video_gx.c |   32 +++++++++++++++++---------------
 1 files changed, 17 insertions(+), 15 deletions(-)

diff --git a/drivers/video/geode/video_gx.c b/drivers/video/geode/video_gx.c
index a53936f..b436155 100644
--- a/drivers/video/geode/video_gx.c
+++ b/drivers/video/geode/video_gx.c
@@ -238,18 +238,6 @@ static void gx_configure_display(struct fb_info *info)
        struct geodefb_par *par = info->par;
        u32 dcfg, misc;
 
-       /* Set up the MISC register */
-
-       misc = readl(par->vid_regs + GX_MISC);
-
-       /* Power up the DAC */
-       misc &= ~(GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN);
-
-       /* Disable gamma correction */
-       misc |= GX_MISC_GAM_EN;
-
-       writel(misc, par->vid_regs + GX_MISC);
-
        /* Write the display configuration */
        dcfg = readl(par->vid_regs + GX_DCFG);
 
@@ -268,14 +256,28 @@ static void gx_configure_display(struct fb_info *info)
        /* Enable hsync and vsync. */
        dcfg |= GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN;
 
-       /* Only change the sync polarities if we are running
-        * in CRT mode.  The FP polarities will be handled in
-        * gxfb_configure_tft */
+       misc = readl(par->vid_regs + GX_MISC);
+
+       /* Disable gamma correction */
+       misc |= GX_MISC_GAM_EN;
+
        if (par->enable_crt) {
+
+               /* Power up the CRT DACs */
+               misc &= ~(GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN);
+               writel(misc, par->vid_regs + GX_MISC);
+
+               /* Only change the sync polarities if we are running
+                * in CRT mode.  The FP polarities will be handled in
+                * gxfb_configure_tft */
                if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
                        dcfg |= GX_DCFG_CRT_HSYNC_POL;
                if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
                        dcfg |= GX_DCFG_CRT_VSYNC_POL;
+       } else {
+               /* Power down the CRT DACs if in FP mode */
+               misc |= (GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN);
+               writel(misc, par->vid_regs + GX_MISC);
        }
 
        /* Enable the display logic */
-- 
1.5.3.7

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to