After set the AUART_CTRL0_CLKGATE, the UART will gate all the clocks off.
So the following line will not take effect.
................................................................
writel(AUART_INTR_RXIEN | AUART_INTR_RTIEN | AUART_INTR_CTSMIEN,
u->membase + AUART_INTR_CLR);
................................................................
To fix this issue, the patch moves this gate-off line to
the end of setting registers.
Signed-off-by: Huang Shijie <[email protected]>
---
drivers/tty/serial/mxs-auart.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index dafeef2..ea5f888 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -457,11 +457,11 @@ static void mxs_auart_shutdown(struct uart_port *u)
writel(AUART_CTRL2_UARTEN, u->membase + AUART_CTRL2_CLR);
- writel(AUART_CTRL0_CLKGATE, u->membase + AUART_CTRL0_SET);
-
writel(AUART_INTR_RXIEN | AUART_INTR_RTIEN | AUART_INTR_CTSMIEN,
u->membase + AUART_INTR_CLR);
+ writel(AUART_CTRL0_CLKGATE, u->membase + AUART_CTRL0_SET);
+
clk_disable_unprepare(s->clk);
}
--
1.7.4.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
