On 10/23/2012 10:24 PM, Peter Korsgaard wrote:
"Andreas" == Andreas Larsson <andr...@gaisler.com> writes:[...] Andreas> +/* Read and write functions for the GRLIB port of the controller. Registers are Andreas> + * 32-bit big endian and the PRELOW and PREHIGH registers are merged into one Andreas> + * register. The subsequent registers has their offset decreased accordingly. */ Andreas> +static u8 oc_getreg_grlib(struct ocores_i2c *i2c, int reg) Andreas> +{ Andreas> + u32 rd; Andreas> + int rreg = reg; Andreas> + if (reg != OCI2C_PRELOW) Andreas> + rreg--; Andreas> + rd = ioread32be(i2c->base + (rreg << i2c->reg_shift)); Andreas> + if (reg == OCI2C_PREHIGH) Andreas> + return (u8)rd >> 8; Andreas> + else Andreas> + return (u8)rd; Andreas> +} Andreas> + Andreas> +static void oc_setreg_grlib(struct ocores_i2c *i2c, int reg, u8 value) Andreas> +{ Andreas> + u32 curr, wr; Andreas> + int rreg = reg; Andreas> + if (reg != OCI2C_PRELOW) Andreas> + rreg--; Andreas> + if (reg == OCI2C_PRELOW || reg == OCI2C_PREHIGH) { Andreas> + curr = ioread32be(i2c->base + (rreg << i2c->reg_shift)); Andreas> + if (reg == OCI2C_PRELOW) Andreas> + wr = (curr & 0xff00) | value; Andreas> + else Andreas> + wr = (((u32)value) << 8) | (curr & 0xff); Andreas> + } else { Andreas> + wr = value; Andreas> + } Andreas> + iowrite32be(wr, i2c->base + (rreg << i2c->reg_shift));Are all platforms using i2c-ocores guaranteed to provide ioread32be / iowrite32be or should we stick an #ifdef CONFIG_SPARC around it?
As far as I can see, after digging around, the only platforms that have ioread/write32, but not ioread/write32be are frv and mn10300. Do you know if those platforms are using i2c-ocores?
Cheers, Andreas Larsson -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
