On Tue, Dec 04, 2012 at 08:34:02AM -0600, Mark Langsdorf wrote:
> Highbank processors depend on the external ECME to perform voltage
> management based on a requested frequency. Communication between the
> A9 cores and the ECME happens over the pl320 IPC channel.
>
> Signed-off-by: Mark Langsdorf <mark.langsd...@calxeda.com>
> Cc: shawn....@linaro.org
> Cc: mturque...@ti.com
> ---
> Changes from v6
> Removed devicetree bindings documentation.
> Restructured driver to use clk notifications.
> Core driver logic is now cpufreq-clk0.
Great. It saves some codes :)
> Changes from v5
> Changed ipc_transmit() to pl320_ipc_transmit().
> Changes from v4
> Removed erroneous changes to arch/arm/Kconfig.
> Removed unnecessary changes to drivers/cpufreq/Kconfig.arm
> Alphabetized additions to arch/arm/mach-highbank/Kconfig
> Changed ipc call and header to match new ipc location in
> drivers/mailbox.
> Changes from v3
> None.
> Changes from v2
> Changed transition latency binding in code to match documentation.
> Changes from v1
> Added highbank specific Kconfig changes.
>
> arch/arm/boot/dts/highbank.dts | 10 ++++
> arch/arm/mach-highbank/Kconfig | 2 +
> drivers/cpufreq/Kconfig.arm | 16 ++++++
> drivers/cpufreq/Makefile | 1 +
> drivers/cpufreq/highbank-cpufreq.c | 106
> +++++++++++++++++++++++++++++++++++++
> 5 files changed, 135 insertions(+)
> create mode 100644 drivers/cpufreq/highbank-cpufreq.c
>
> diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
> index 0c6fc34..7c4c27d 100644
> --- a/arch/arm/boot/dts/highbank.dts
> +++ b/arch/arm/boot/dts/highbank.dts
> @@ -36,6 +36,16 @@
> next-level-cache = <&L2>;
> clocks = <&a9pll>;
> clock-names = "cpu";
> + operating-points = <
> + /* kHz ignored */
> + 1300000 1000000
> + 1200000 1000000
> + 1100000 1000000
> + 800000 1000000
> + 400000 1000000
> + 200000 1000000
> + >;
> + clock-latency = <100000>;
> };
>
> cpu@1 {
> diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig
> index 2896881..b7862da 100644
> --- a/arch/arm/mach-highbank/Kconfig
> +++ b/arch/arm/mach-highbank/Kconfig
> @@ -1,5 +1,7 @@
> config ARCH_HIGHBANK
> bool "Calxeda ECX-1000 (Highbank)" if ARCH_MULTI_V7
> + select ARCH_HAS_CPUFREQ
> + select ARCH_HAS_OPP
> select ARCH_WANT_OPTIONAL_GPIOLIB
> select ARM_AMBA
> select ARM_GIC
> diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
> index 5961e64..7aaac9f 100644
> --- a/drivers/cpufreq/Kconfig.arm
> +++ b/drivers/cpufreq/Kconfig.arm
> @@ -76,3 +76,19 @@ config ARM_EXYNOS5250_CPUFREQ
> help
> This adds the CPUFreq driver for Samsung EXYNOS5250
> SoC.
> +
> +config ARM_HIGHBANK_CPUFREQ
> + tristate "Calxeda Highbank-based"
> + depends on ARCH_HIGHBANK
> + select CPU_FREQ_TABLE
> + select GENERIC_CPUFREQ_CPU0
> + select PM_OPP
> + select REGULATOR
> +
> + default m
> + help
> + This adds the CPUFreq driver for Calxeda Highbank SoC
> + based boards.
> +
> + If in doubt, say N.
> +
> diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
> index 1bc90e1..9e8f12a 100644
> --- a/drivers/cpufreq/Makefile
> +++ b/drivers/cpufreq/Makefile
> @@ -50,6 +50,7 @@ obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ) +=
> exynos4210-cpufreq.o
> obj-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ) += exynos4x12-cpufreq.o
> obj-$(CONFIG_ARM_EXYNOS5250_CPUFREQ) += exynos5250-cpufreq.o
> obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o
> +obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o
>
>
> ##################################################################################
> # PowerPC platform drivers
> diff --git a/drivers/cpufreq/highbank-cpufreq.c
> b/drivers/cpufreq/highbank-cpufreq.c
> new file mode 100644
> index 0000000..25ef437
> --- /dev/null
> +++ b/drivers/cpufreq/highbank-cpufreq.c
> @@ -0,0 +1,106 @@
> +/*
> + * Copyright (C) 2012 Calxeda, Inc.
> + *
> + * derived from cpufreq-cpu0 by Freescale Semiconductor
It's not any more, right?
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/clk.h>
> +#include <linux/cpu.h>
> +#include <linux/err.h>
> +#include <linux/of.h>
> +#include <linux/opp.h>
Do you need this header?
> +#include <linux/slab.h>
> +#include <linux/mailbox.h>
> +
> +#define HB_CPUFREQ_CHANGE_NOTE 0x80000001
> +
> +static struct device *cpu_dev;
> +static struct clk *cpu_clk;
These two now can be local variables hb_cpufreq_driver_init().
> +
> +static int hb_voltage_change(unsigned int freq)
> +{
> + int i;
> + u32 msg[7];
> +
> + msg[0] = HB_CPUFREQ_CHANGE_NOTE;
> + msg[1] = freq / 1000000;
> + for (i = 2; i < 7; i++)
> + msg[i] = 0;
> +
> + return pl320_ipc_transmit(msg);
> +}
> +
> +static int hb_cpufreq_clk_notify(struct notifier_block *nb,
> + unsigned long action, void *hclk)
> +{
> + struct clk_notifier_data *clk_data = hclk;
> + int i = 0;
> +
> + if (action == PRE_RATE_CHANGE) {
> + if (clk_data->new_rate > clk_data->old_rate)
> + while (hb_voltage_change(clk_data->new_rate))
> + if (i++ > 15)
> + return NOTIFY_STOP;
> + } else if (action == POST_RATE_CHANGE)
Add a {} pair for else block or remove {} for if?
> + if (clk_data->new_rate < clk_data->old_rate)
> + while (hb_voltage_change(clk_data->new_rate))
> + if (i++ > 15)
> + break;
> +
> + return NOTIFY_DONE;
> +}
> +
> +static struct notifier_block hb_cpufreq_clk_nb = {
> + .notifier_call = hb_cpufreq_clk_notify,
> +};
> +
> +static int __devinit hb_cpufreq_driver_init(void)
Isn't there a big series removing __devinit from the kernel tree
as CONFIG_HOTPLUG is going away?
Shawn
> +{
> + struct device_node *np;
> + int ret;
> +
> + np = of_find_node_by_path("/cpus/cpu@0");
> + if (!np) {
> + pr_err("failed to find highbank cpufreq node\n");
> + return -ENOENT;
> + }
> +
> + cpu_dev = get_cpu_device(0);
> + if (!cpu_dev) {
> + pr_err("failed to get highbank cpufreq device\n");
> + ret = -ENODEV;
> + goto out_put_node;
> + }
> +
> + cpu_dev->of_node = np;
> +
> + cpu_clk = clk_get(cpu_dev, NULL);
> + if (IS_ERR(cpu_clk)) {
> + ret = PTR_ERR(cpu_clk);
> + pr_err("failed to get cpu0 clock: %d\n", ret);
> + goto out_put_node;
> + }
> +
> + ret = clk_notifier_register(cpu_clk, &hb_cpufreq_clk_nb);
> + if (ret) {
> + pr_err("failed to register clk notifier: %d\n", ret);
> + goto out_put_node;
> + }
> +
> +out_put_node:
> + of_node_put(np);
> + return ret;
> +}
> +late_initcall(hb_cpufreq_driver_init);
> +
> +MODULE_AUTHOR("Mark Langsdorf <mark.langsd...@calxeda.com>");
> +MODULE_DESCRIPTION("Calxeda Highbank cpufreq driver");
> +MODULE_LICENSE("GPL");
> --
> 1.7.11.7
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
