As it seems there are no further comments, could this please be included ?
Thanks,
Lars
On Monday 17 December 2012 at 09:34:15, Lars Poeschel wrote:
> From: Lars Poeschel <poesc...@lemonage.de>
>
> This driver allows to use a lcd2s 20x4 character display as
> a linux console output device.
>
> Signed-off-by: Lars Poeschel <poesc...@lemonage.de>
>
> ---
> drivers/video/console/Kconfig | 10 ++
> drivers/video/console/Makefile | 1 +
> drivers/video/console/lcd2scon.c | 360
> ++++++++++++++++++++++++++++++++++++++ 3 files changed, 371 insertions(+)
> create mode 100644 drivers/video/console/lcd2scon.c
>
> diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
> index e2c96d0..44fc3bf 100644
> --- a/drivers/video/console/Kconfig
> +++ b/drivers/video/console/Kconfig
> @@ -129,6 +129,16 @@ config STI_CONSOLE
> machines. Say Y here to build support for it into your kernel.
> The alternative is to use your primary serial port as a
> console.
>
> +config LCD2S_CONSOLE
> + tristate "lcd2s 20x4 character display over I2C console"
> + depends on I2C
> + default n
> + help
> + This is a driver that lets you use the lcd2s 20x4 character
> display + from modtronix engineering as a console output device.
> The display + is a simple single color character display. You
> have to connect it + to an I2C bus.
> +
> config FONTS
> bool "Select compiled-in fonts"
> depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
> diff --git a/drivers/video/console/Makefile
> b/drivers/video/console/Makefile index a862e91..74d5993 100644
> --- a/drivers/video/console/Makefile
> +++ b/drivers/video/console/Makefile
> @@ -23,6 +23,7 @@ font-objs += $(font-objs-y)
> obj-$(CONFIG_DUMMY_CONSOLE) += dummycon.o
> obj-$(CONFIG_SGI_NEWPORT_CONSOLE) += newport_con.o font.o
> obj-$(CONFIG_STI_CONSOLE) += sticon.o sticore.o font.o
> +obj-$(CONFIG_LCD2S_CONSOLE) += lcd2scon.o
> obj-$(CONFIG_VGA_CONSOLE) += vgacon.o
> obj-$(CONFIG_MDA_CONSOLE) += mdacon.o
> obj-$(CONFIG_FRAMEBUFFER_CONSOLE) += fbcon.o bitblit.o font.o
> softcursor.o diff --git a/drivers/video/console/lcd2scon.c
> b/drivers/video/console/lcd2scon.c new file mode 100644
> index 0000000..c139811
> --- /dev/null
> +++ b/drivers/video/console/lcd2scon.c
> @@ -0,0 +1,360 @@
> +/*
> + * console driver for LCD2S 4x20 character displays connected through
> i2c. + *
> + * This is a driver allowing you to use a LCD2S 4x20 from modtronix
> + * engineering as console output device.
> + *
> + * (C) 2012 by Lemonage Software GmbH
> + * Author: Lars Poeschel <poesc...@lemonage.de>
> + * All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> it + * under the terms of the GNU General Public License as published
> by the + * Free Software Foundation; either version 2 of the License,
> or (at your + * option) any later version.
> + *
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/kd.h>
> +#include <linux/tty.h>
> +#include <linux/console_struct.h>
> +#include <linux/console.h>
> +#include <linux/vt_kern.h>
> +#include <linux/i2c.h>
> +
> +#define LCD2S_CMD_CUR_BLINK_OFF 0x10
> +#define LCD2S_CMD_CUR_UL_OFF 0x11
> +#define LCD2S_CMD_DISPLAY_OFF 0x12
> +#define LCD2S_CMD_CUR_BLINK_ON 0x18
> +#define LCD2S_CMD_CUR_UL_ON 0x19
> +#define LCD2S_CMD_DISPLAY_ON 0x1a
> +#define LCD2S_CMD_BACKLIGHT_OFF 0x20
> +#define LCD2S_CMD_BACKLIGHT_ON 0x28
> +#define LCD2S_CMD_WRITE 0x80
> +#define LCD2S_CMD_SHIFT_UP 0x87
> +#define LCD2S_CMD_SHIFT_DOWN 0x88
> +#define LCD2S_CMD_CUR_ADDR 0x89
> +#define LCD2S_CMD_CUR_POS 0x8a
> +#define LCD2S_CMD_CUR_RESET 0x8b
> +#define LCD2S_CMD_CLEAR 0x8c
> +
> +#define LCD2S_FIRST 8
> +#define LCD2S_LAST 9
> +
> +#define LCD2S_ROWS 4
> +#define LCD2S_COLS 20
> +
> +struct lcd2s_data {
> + struct i2c_client *i2c;
> + int row;
> + int col;
> + unsigned int cur_blink:1;
> + unsigned int cur_ul:1;
> +};
> +
> +static struct lcd2s_data lcd2s;
> +
> +static void lcd2s_set_cursor(int row, int col)
> +{
> + u8 buf[] = { LCD2S_CMD_CUR_POS, row + 1, col + 1};
> +
> + if (row == lcd2s.row && col == lcd2s.col)
> + return;
> +
> + i2c_master_send(lcd2s.i2c, buf, sizeof(buf));
> + lcd2s.row = row;
> + lcd2s.col = col;
> +}
> +
> +static void lcd2s_reset_cursor(void)
> +{
> + i2c_smbus_write_byte(lcd2s.i2c, LCD2S_CMD_CUR_RESET);
> + lcd2s.row = 0;
> + lcd2s.col = 0;
> +}
> +
> +static void lcd2s_increase_cursor(struct vc_data *con, int inc)
> +{
> + lcd2s.col += inc;
> + if ((lcd2s.col / con->vc_cols) >= 1) {
> + lcd2s.row += (lcd2s.col / con->vc_cols);
> + lcd2s.col %= con->vc_cols;
> + }
> +}
> +
> +static void lcd2s_cursor_ul_on(void)
> +{
> + if (!lcd2s.cur_ul) {
> + i2c_smbus_write_byte(lcd2s.i2c, LCD2S_CMD_CUR_UL_ON);
> + lcd2s.cur_ul = 1;
> + }
> +}
> +
> +static void lcd2s_cursor_ul_off(void)
> +{
> + if (lcd2s.cur_ul) {
> + i2c_smbus_write_byte(lcd2s.i2c, LCD2S_CMD_CUR_UL_OFF);
> + lcd2s.cur_ul = 0;
> + }
> +}
> +
> +static void lcd2s_cursor_blink_on(void)
> +{
> + if (!lcd2s.cur_blink) {
> + i2c_smbus_write_byte(lcd2s.i2c, LCD2S_CMD_CUR_BLINK_ON);
> + lcd2s.cur_blink = 1;
> + }
> +}
> +
> +static void lcd2s_cursor_blink_off(void)
> +{
> + if (lcd2s.cur_blink) {
> + i2c_smbus_write_byte(lcd2s.i2c, LCD2S_CMD_CUR_BLINK_OFF);
> + lcd2s.cur_blink = 0;
> + }
> +}
> +
> +static const char *lcd2s_startup(void)
> +{
> + return "lcd2s console";
> +}
> +
> +
> +/*
> + * init is set if console is currently allocated during init
> + */
> +static void lcd2s_init(struct vc_data *con, int init)
> +{
> + lcd2s.cur_blink = 0;
> + lcd2s.cur_ul = 0;
> +
> + /* turn display on */
> + i2c_smbus_write_byte(lcd2s.i2c, LCD2S_CMD_DISPLAY_ON);
> + i2c_smbus_write_byte(lcd2s.i2c, LCD2S_CMD_BACKLIGHT_ON);
> + i2c_smbus_write_byte(lcd2s.i2c, LCD2S_CMD_CLEAR);
> + lcd2s_cursor_ul_on();
> + lcd2s_reset_cursor();
> +
> + con->vc_can_do_color = 0;
> + con->vc_hi_font_mask = 0;
> +
> + if (init) {
> + con->vc_rows = LCD2S_ROWS;
> + con->vc_cols = LCD2S_COLS;
> + } else
> + vc_resize(con, LCD2S_COLS, LCD2S_ROWS);
> +}
> +
> +static void lcd2s_deinit(struct vc_data *con)
> +{
> + i2c_smbus_write_byte(lcd2s.i2c, LCD2S_CMD_DISPLAY_OFF);
> + i2c_smbus_write_byte(lcd2s.i2c, LCD2S_CMD_BACKLIGHT_OFF);
> + lcd2s_cursor_blink_off();
> + lcd2s_cursor_ul_off();
> +}
> +
> +static void lcd2s_clear(struct vc_data *con, int s_row, int s_col,
> + int height, int width)
> +{
> + u8 buf[width];
> + int i;
> +
> + if (width <= 0 || height <= 0)
> + return;
> +
> + /* if the whole display is to clear, we have a single command */
> + if (s_col == 0 && s_row == 0 &&
> + height >= con->vc_rows - 1 && width >= con->vc_cols - 1) {
> + i2c_smbus_write_byte(lcd2s.i2c, LCD2S_CMD_CLEAR);
> + return;
> + }
> +
> + for (i = 0; i <= width; i++)
> + buf[i] = ' ';
> +
> + for (i = s_col; i <= height; i++) {
> + lcd2s_set_cursor(s_row, i);
> + i2c_master_send(lcd2s.i2c, buf, width);
> + }
> +}
> +
> +static void lcd2s_putc(struct vc_data *con, int data, int row, int col)
> +{
> + u8 buf[] = {LCD2S_CMD_WRITE, data};
> +
> + lcd2s_set_cursor(row, col);
> +
> + i2c_master_send(lcd2s.i2c, buf, sizeof(buf));
> + lcd2s_increase_cursor(con, 1);
> +}
> +
> +static void lcd2s_putcs(struct vc_data *con, const unsigned short *buf,
> + int len, int row, int col)
> +{
> + u8 *i2c_buf;
> + int i;
> +
> + i2c_buf = kzalloc(len + 1, GFP_KERNEL);
> + if (!i2c_buf)
> + return;
> +
> + lcd2s_set_cursor(row, col);
> +
> + i2c_buf[0] = LCD2S_CMD_WRITE;
> + for (i = 0; i < len ; i++)
> + i2c_buf[i + 1] = buf[i];
> +
> + i2c_master_send(lcd2s.i2c, i2c_buf, len + 1);
> + kfree(i2c_buf);
> + lcd2s_increase_cursor(con, len);
> +}
> +
> +static void lcd2s_cursor(struct vc_data *con, int mode)
> +{
> + switch (mode) {
> + case CM_ERASE:
> + lcd2s_cursor_blink_off();
> + lcd2s_cursor_ul_off();
> + break;
> + case CM_MOVE:
> + case CM_DRAW:
> + lcd2s_set_cursor(con->vc_y, con->vc_x);
> +
> + switch (con->vc_cursor_type & CUR_HWMASK) {
> + case CUR_UNDERLINE:
> + lcd2s_cursor_ul_on();
> + lcd2s_cursor_blink_off();
> + break;
> + case CUR_NONE:
> + lcd2s_cursor_blink_off();
> + lcd2s_cursor_ul_off();
> + break;
> + default:
> + lcd2s_cursor_blink_on();
> + lcd2s_cursor_ul_off();
> + break;
> + }
> + break;
> + }
> +}
> +
> +static int lcd2s_scroll(struct vc_data *con, int top, int bot,
> + int dir, int lines)
> +{
> + /* we can only scroll the whole display */
> + if (top == 0 && bot == con->vc_rows) {
> + while (lines--) {
> + switch (dir) {
> + case SM_UP:
> + i2c_smbus_write_byte(lcd2s.i2c,
> + LCD2S_CMD_SHIFT_UP);
> + break;
> + case SM_DOWN:
> + i2c_smbus_write_byte(lcd2s.i2c,
> + LCD2S_CMD_SHIFT_DOWN);
> + break;
> + }
> + }
> + return 0;
> + }
> + return 1;
> +}
> +
> +static void lcd2s_bmove(struct vc_data *conp, int s_row, int s_col,
> + int d_row, int d_col, int height, int width)
> +{
> +}
> +
> +static int lcd2s_switch(struct vc_data *con)
> +{
> + return 1;
> +}
> +
> +static int lcd2s_blank(struct vc_data *con, int blank, int mode_switch)
> +{
> + switch (blank) {
> + case 0: /* unblank */
> + i2c_smbus_write_byte(lcd2s.i2c, LCD2S_CMD_DISPLAY_ON);
> + i2c_smbus_write_byte(lcd2s.i2c, LCD2S_CMD_BACKLIGHT_ON);
> + break;
> + case 1: /* normal blanking */
> + i2c_smbus_write_byte(lcd2s.i2c, LCD2S_CMD_DISPLAY_OFF);
> + i2c_smbus_write_byte(lcd2s.i2c, LCD2S_CMD_BACKLIGHT_OFF);
> + break;
> + }
> + return 0;
> +}
> +
> +static int lcd2s_set_palette(struct vc_data *con, unsigned char *table)
> +{
> + return -EINVAL;
> +}
> +
> +static int lcd2s_scrolldelta(struct vc_data *con, int lines)
> +{
> + return 0;
> +}
> +
> +static struct consw lcd2s_con = {
> + .owner = THIS_MODULE,
> + .con_startup = lcd2s_startup,
> + .con_init = lcd2s_init,
> + .con_deinit = lcd2s_deinit,
> + .con_clear = lcd2s_clear,
> + .con_putc = lcd2s_putc,
> + .con_putcs = lcd2s_putcs,
> + .con_cursor = lcd2s_cursor,
> + .con_scroll = lcd2s_scroll,
> + .con_bmove = lcd2s_bmove,
> + .con_switch = lcd2s_switch,
> + .con_blank = lcd2s_blank,
> + .con_set_palette = lcd2s_set_palette,
> + .con_scrolldelta = lcd2s_scrolldelta,
> +};
> +
> +static int __devinit lcd2s_i2c_probe(struct i2c_client *i2c,
> + const struct i2c_device_id *id)
> +{
> + if (!i2c_check_functionality(i2c->adapter,
> + I2C_FUNC_SMBUS_WRITE_BYTE_DATA |
> + I2C_FUNC_SMBUS_WRITE_BLOCK_DATA))
> + return -EIO;
> +
> + lcd2s.i2c = i2c;
> +
> + take_over_console(&lcd2s_con, LCD2S_FIRST, LCD2S_LAST, 1);
> +
> + return 0;
> +}
> +
> +static __devexit int lcd2s_i2c_remove(struct i2c_client *i2c)
> +{
> + /* unregister from console subsystem */
> + unregister_con_driver(&lcd2s_con);
> + return 0;
> +}
> +
> +static const struct i2c_device_id lcd2s_i2c_id[] = {
> + { "lcd2s", 0 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, lcd2s_i2c_id);
> +
> +static struct i2c_driver lcd2s_i2c_driver = {
> + .driver = {
> + .name = "lcd2s",
> + .owner = THIS_MODULE,
> + },
> + .probe = lcd2s_i2c_probe,
> + .remove = __devexit_p(lcd2s_i2c_remove),
> + .id_table = lcd2s_i2c_id,
> +};
> +
> +module_i2c_driver(lcd2s_i2c_driver)
> +
> +MODULE_DESCRIPTION("LCD2S character display console driver");
> +MODULE_AUTHOR("Lars Poeschel");
> +MODULE_LICENSE("GPL");
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
