Hi Gregory, On Thu, May 02, 2013 at 09:43:22PM +0200, Gregory CLEMENT wrote: > The OpenBlocks A6 board has one software-controlled button on the > front side, labeled "INIT", so we add minimal support for this button > in the kernel. > > Signed-off-by: Gregory CLEMENT <[email protected]> > --- > arch/arm/boot/dts/kirkwood-openblocks_a6.dts | 13 +++++++++++++ > 1 file changed, 13 insertions(+) > > diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts > b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts > index d27f724..627d8d0 100644 > --- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts > +++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts > @@ -209,4 +209,17 @@ > gpios = <&gpio1 11 1>; > }; > }; > + > + gpio_keys { > + compatible = "gpio-keys"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + button@1 { > + label = "Init Button"; > + linux,code = <116>; > + gpios = <&gpio1 6 0>; > + }; > + }; > + > };
Shouldn't you add a proper pinctrl entry for this as well? -- Ezequiel García, Free Electrons Embedded Linux, Kernel and Android Engineering http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
