Signed-off-by: Maxime Ripard <maxime.rip...@free-electrons.com>
---
 arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 75 ++++++++++++++++++++++++
 1 file changed, 75 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts

diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts 
b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
new file mode 100644
index 0000000..73ad65e
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
@@ -0,0 +1,75 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.rip...@free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun5i-a10s.dtsi"
+
+/ {
+       model = "Olimex A10s-Olinuxino Micro";
+       compatible = "olimex,a10s-olinuxino-micro", "allwinner,sun5i-a10s";
+
+       soc@01c20000 {
+               emac: ethernet@01c0b000 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&emac_pins_a>;
+                       phy = <&phy1>;
+                       status = "okay";
+               };
+
+               mdio@01c0b080 {
+                       status = "okay";
+
+                       phy1: ethernet-phy@1 {
+                               reg = <1>;
+                       };
+               };
+
+               pinctrl@01c20800 {
+                       led_pins_olinuxino: led_pins@0 {
+                               allwinner,pins = "PE3";
+                               allwinner,function = "gpio_out";
+                               allwinner,drive = <1>;
+                               allwinner,pull = <0>;
+                       };
+               };
+
+               uart0: serial@01c28000 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&uart0_pins_a>;
+                       status = "okay";
+               };
+
+               uart2: serial@01c28800 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&uart2_pins_a>;
+                       status = "okay";
+               };
+
+               uart3: serial@01c28c00 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&uart3_pins_a>;
+                       status = "okay";
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&led_pins_olinuxino>;
+
+               power {
+                       gpios = <&pio 4 3 0>;
+                       default-state = "on";
+               };
+       };
+};
-- 
1.8.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to