Hi Emilio,
On Fri, Jun 14, 2013 at 03:09:49PM -0300, Emilio López wrote:
> Hi Maxime,
>
> El 09/06/13 13:36, Maxime Ripard escribió:
> > Signed-off-by: Maxime Ripard <maxime.rip...@free-electrons.com>
> > ---
> > arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 75
> > ++++++++++++++++++++++++
> > 1 file changed, 75 insertions(+)
> > create mode 100644 arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
>
> Please add this on the sunxi target in arch/arm/boot/dts/Makefile so it
> gets built on make dtbs.
>
> (snip)
>
> > + leds {
> > + compatible = "gpio-leds";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&led_pins_olinuxino>;
> > +
> > + power {
> > + gpios = <&pio 4 3 0>;
> > + default-state = "on";
> > + };
>
> Also, as discussed on IRC, I think it would be wise to change the name
> on the LED node. The schematics have a 'power' led already that is
> hard-wired to 3.3v, and this led node that you are declaring is referred
> as 'led1' there. I suppose 'green' would be a suitable name to keep
> consistency with other sunxi boards (namely cubieboard).
>
> Other than that, my OLinuXino worked just fine after applying this
> patchset, so
>
> Tested-by: Emilio López <emi...@elopez.com.ar>
Thanks for your comments and the test.
I'll send a v2.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
