From: Srinivas Kandagatla <srinivas.kandaga...@st.com>
The STiH416 is advanced HD AVC processor with 3D graphics acceleration
and 1.2-GHz ARM Cortex-A9 SMP CPU.
Signed-off-by: Srinivas Kandagatla <srinivas.kandaga...@st.com>
CC: Stephen Gallimore <stephen.gallim...@st.com>
CC: Stuart Menefy <stuart.men...@st.com>
CC: Arnd Bergmann <a...@arndb.de>
CC: Linus Walleij <linus.wall...@linaro.org>
---
Documentation/arm/stixxxx/stih416-overview.txt | 12 +
arch/arm/boot/dts/stih416-clock.dtsi | 41 ++++
arch/arm/boot/dts/stih416-pinctrl.dtsi | 295 ++++++++++++++++++++++++
arch/arm/boot/dts/stih416.dtsi | 96 ++++++++
arch/arm/mach-stixxxx/Kconfig | 9 +
arch/arm/mach-stixxxx/board-dt.c | 3 +-
6 files changed, 455 insertions(+), 1 deletions(-)
create mode 100644 Documentation/arm/stixxxx/stih416-overview.txt
create mode 100644 arch/arm/boot/dts/stih416-clock.dtsi
create mode 100644 arch/arm/boot/dts/stih416-pinctrl.dtsi
create mode 100644 arch/arm/boot/dts/stih416.dtsi
diff --git a/Documentation/arm/stixxxx/stih416-overview.txt
b/Documentation/arm/stixxxx/stih416-overview.txt
new file mode 100644
index 0000000..558444c
--- /dev/null
+++ b/Documentation/arm/stixxxx/stih416-overview.txt
@@ -0,0 +1,12 @@
+ STiH416 Overview
+ ================
+
+Introduction
+------------
+
+ The STiH416 is the next generation of HD, AVC set-top box processors
+ for satellite, cable, terrestrial and IP-STB markets.
+
+ Features
+ - ARM Cortex-A9 1.2 GHz dual core CPU
+ - SATA2x2,USB 2.0x3, PCIe, Gbit Ethernet MACx2
diff --git a/arch/arm/boot/dts/stih416-clock.dtsi
b/arch/arm/boot/dts/stih416-clock.dtsi
new file mode 100644
index 0000000..7026bf1
--- /dev/null
+++ b/arch/arm/boot/dts/stih416-clock.dtsi
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics R&D Limited
+ * <stlinux-de...@stlinux.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/ {
+ clocks {
+ /*
+ * Fixed 30MHz oscillator inputs to SoC
+ */
+ CLK_SYSIN: CLK_SYSIN {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <30000000>;
+ clock-output-names = "CLK_SYSIN";
+ };
+
+ /*
+ * ARM Peripheral clock for timers
+ */
+ arm_periph_clk: arm_periph_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <600000000>;
+ };
+
+ /*
+ * Bootloader initialized system infrastructure clock for
+ * serial devices.
+ */
+ CLK_S_ICN_REG_0: clockgenA0@4 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <100000000>;
+ clock-output-names = "CLK_S_ICN_REG_0";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi
b/arch/arm/boot/dts/stih416-pinctrl.dtsi
new file mode 100644
index 0000000..957b21a
--- /dev/null
+++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi
@@ -0,0 +1,295 @@
+
+/*
+ * Copyright (C) 2013 STMicroelectronics Limited.
+ * Author: Srinivas Kandagatla <srinivas.kandaga...@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "st-pincfg.h"
+/ {
+
+ aliases {
+ gpio0 = &PIO0;
+ gpio1 = &PIO1;
+ gpio2 = &PIO2;
+ gpio3 = &PIO3;
+ gpio4 = &PIO4;
+ gpio5 = &PIO40;
+ gpio6 = &PIO5;
+ gpio7 = &PIO6;
+ gpio8 = &PIO7;
+ gpio9 = &PIO8;
+ gpio10 = &PIO9;
+ gpio11 = &PIO10;
+ gpio12 = &PIO11;
+ gpio13 = &PIO12;
+ gpio14 = &PIO30;
+ gpio15 = &PIO31;
+ gpio16 = &PIO13;
+ gpio17 = &PIO14;
+ gpio18 = &PIO15;
+ gpio19 = &PIO16;
+ gpio20 = &PIO17;
+ gpio21 = &PIO18;
+ gpio22 = &PIO100;
+ gpio23 = &PIO101;
+ gpio24 = &PIO102;
+ gpio25 = &PIO103;
+ gpio26 = &PIO104;
+ gpio27 = &PIO105;
+ gpio28 = &PIO106;
+ gpio29 = &PIO107;
+ };
+
+ soc {
+ pin-controller-sbc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stih416-sbc-pinctrl";
+ st,syscfg = <&syscfg_sbc>;
+ ranges = <0 0xfe610000 0x6000>;
+
+ PIO0: gpio@fe610000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ reg = <0 0x100>;
+ st,bank-name = "PIO0";
+ };
+ PIO1: gpio@fe611000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ reg = <0x1000 0x100>;
+ st,bank-name = "PIO1";
+ };
+ PIO2: gpio@fe612000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ reg = <0x2000 0x100>;
+ st,bank-name = "PIO2";
+ };
+ PIO3: gpio@fe613000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ reg = <0x3000 0x100>;
+ st,bank-name = "PIO3";
+ };
+ PIO4: gpio@fe614000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ reg = <0x4000 0x100>;
+ st,bank-name = "PIO4";
+ };
+ PIO40: gpio@fe615000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ reg = <0x5000 0x100>;
+ st,bank-name = "PIO40";
+ st,retime-pin-mask = <0x7f>;
+ };
+
+ sbc_serial1 {
+ pinctrl_sbc_serial1: sbc_serial1 {
+ st,pins {
+ tx = <&PIO2 6 ALT3 OUT>;
+ rx = <&PIO2 7 ALT3 IN>;
+ };
+ };
+ };
+ };
+
+ pin-controller-front {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stih416-front-pinctrl";
+ st,syscfg = <&syscfg_front>;
+ ranges = <0 0xfee00000 0x10000>;
+
+ PIO5: gpio@fee00000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ reg = <0 0x100>;
+ st,bank-name = "PIO5";
+ };
+ PIO6: gpio@fee01000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ reg = <0x1000 0x100>;
+ st,bank-name = "PIO6";
+ };
+ PIO7: gpio@fee02000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ reg = <0x2000 0x100>;
+ st,bank-name = "PIO7";
+ };
+ PIO8: gpio@fee03000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ reg = <0x3000 0x100>;
+ st,bank-name = "PIO8";
+ };
+ PIO9: gpio@fee04000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ reg = <0x4000 0x100>;
+ st,bank-name = "PIO9";
+ };
+ PIO10: gpio@fee05000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ reg = <0x5000 0x100>;
+ st,bank-name = "PIO10";
+ };
+ PIO11: gpio@fee06000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ reg = <0x6000 0x100>;
+ st,bank-name = "PIO11";
+ };
+ PIO12: gpio@fee07000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ reg = <0x7000 0x100>;
+ st,bank-name = "PIO12";
+ };
+ PIO30: gpio@fee08000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ reg = <0x8000 0x100>;
+ st,bank-name = "PIO30";
+ };
+ PIO31: gpio@fee09000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ reg = <0x9000 0x100>;
+ st,bank-name = "PIO31";
+ };
+ };
+
+ pin-controller-rear {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stih416-rear-pinctrl";
+ st,syscfg = <&syscfg_rear>;
+ ranges = <0 0xfe820000 0x6000>;
+
+ PIO13: gpio@fe820000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ reg = <0 0x100>;
+ st,bank-name = "PIO13";
+ };
+ PIO14: gpio@fe821000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ reg = <0x1000 0x100>;
+ st,bank-name = "PIO14";
+ };
+ PIO15: gpio@fe822000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ reg = <0x2000 0x100>;
+ st,bank-name = "PIO15";
+ };
+ PIO16: gpio@fe823000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ reg = <0x3000 0x100>;
+ st,bank-name = "PIO16";
+ };
+ PIO17: gpio@fe824000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ reg = <0x4000 0x100>;
+ st,bank-name = "PIO17";
+ };
+ PIO18: gpio@fe825000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ reg = <0x5000 0x100>;
+ st,bank-name = "PIO18";
+ st,retime-pin-mask = <0xf>;
+ };
+
+ serial2 {
+ pinctrl_serial2: serial2-0 {
+ st,pins {
+ tx = <&PIO17 4 ALT2 OUT>;
+ rx = <&PIO17 5 ALT2 IN>;
+ output-enable = <&PIO11 3
ALT2 OUT>;
+ };
+ };
+ };
+ };
+
+ pin-controller-fvdp-fe {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stih416-fvdp-fe-pinctrl";
+ st,syscfg = <&syscfg_fvdp_fe>;
+ ranges = <0 0xfd6b0000 0x3000>;
+
+ PIO100: gpio@fd6b0000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ reg = <0 0x100>;
+ st,bank-name = "PIO100";
+ };
+ PIO101: gpio@fd6b1000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ reg = <0x1000 0x100>;
+ st,bank-name = "PIO101";
+ };
+ PIO102: gpio@fd6b2000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ reg = <0x2000 0x100>;
+ st,bank-name = "PIO102";
+ };
+ };
+
+ pin-controller-fvdp-lite {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stih416-fvdp-lite-pinctrl";
+ st,syscfg = <&syscfg_fvdp_lite>;
+ ranges = <0 0xfd330000 0x5000>;
+
+ PIO103: gpio@fd330000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ reg = <0 0x100>;
+ st,bank-name = "PIO103";
+ };
+ PIO104: gpio@fd331000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ reg = <0x1000 0x100>;
+ st,bank-name = "PIO104";
+ };
+ PIO105: gpio@fd332000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ reg = <0x2000 0x100>;
+ st,bank-name = "PIO105";
+ };
+ PIO106: gpio@fd333000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ reg = <0x3000 0x100>;
+ st,bank-name = "PIO106";
+ };
+
+ PIO107: gpio@fd334000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ reg = <0x4000 0x100>;
+ st,bank-name = "PIO107";
+ st,retime-pin-mask = <0xf>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
new file mode 100644
index 0000000..3cecd96
--- /dev/null
+++ b/arch/arm/boot/dts/stih416.dtsi
@@ -0,0 +1,96 @@
+/*
+ * Copyright (C) 2012 STMicroelectronics Limited.
+ * Author: Srinivas Kandagatla <srinivas.kandaga...@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "stih41x.dtsi"
+#include "stih416-clock.dtsi"
+#include "stih416-pinctrl.dtsi"
+/ {
+ L2: cache-controller {
+ compatible = "arm,pl310-cache";
+ reg = <0xfffe2000 0x1000>;
+ arm,data-latency = <3 3 3>;
+ arm,tag-latency = <2 2 2>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&intc>;
+ ranges;
+ compatible = "simple-bus";
+
+ syscfg_sbc:sbc-syscfg@fe600000{
+ compatible = "st,stih416-sbc-syscfg", "syscon";
+ reg = <0xfe600000 0x1000>;
+ };
+
+ syscfg_front:front-syscfg@fee10000{
+ compatible = "st,stih416-front-syscfg", "syscon";
+ reg = <0xfee10000 0x1000>;
+ };
+
+ syscfg_rear:rear-syscfg@fe830000{
+ compatible = "st,stih416-rear-syscfg", "syscon";
+ reg = <0xfe830000 0x1000>;
+ };
+
+ /* MPE */
+ syscfg_fvdp_fe:fvdp-fe-syscfg@fddf0000{
+ compatible = "st,stih416-fvdp-fe-syscfg", "syscon";
+ reg = <0xfddf0000 0x1000>;
+ };
+
+ syscfg_fvdp_lite:fvdp-lite-syscfg@fd6a0000{
+ compatible = "st,stih416-fvdp-lite-syscfg",
"syscon";
+ reg = <0xfd6a0000 0x1000>;
+ };
+
+ syscfg_cpu:cpu-syscfg@fdde0000{
+ compatible = "st,stih416-cpu-syscfg", "syscon";
+ reg = <0xfdde0000 0x1000>;
+ };
+
+ syscfg_compo:compo-syscfg@fd320000{
+ compatible = "st,stih416-compo-syscfg", "syscon";
+ reg = <0xfd320000 0x1000>;
+ };
+
+ syscfg_transport:transport-syscfg@fd690000{
+ compatible = "st,stih416-transport-syscfg",
"syscon";
+ reg = <0xfd690000 0x1000>;
+ };
+
+ syscfg_lpm:lpm-syscfg@fe4b5100{
+ compatible = "st,stih416-lpm-syscfg", "syscon";
+ reg = <0xfe4b5100 0x8>;
+ };
+
+ serial2: serial@fed32000{
+ compatible = "st,asc";
+ status = "disabled";
+ reg = <0xfed32000 0x2c>;
+ interrupts = <0 197 0>;
+ clocks = <&CLK_S_ICN_REG_0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_serial2>;
+ };
+
+ /* SBC_UART1 */
+ sbc_serial1: serial@fe531000 {
+ compatible = "st,asc";
+ status = "disabled";
+ reg = <0xfe531000 0x2c>;
+ interrupts = <0 210 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sbc_serial1>;
+ clocks = <&CLK_SYSIN>;
+ };
+ };
+};
diff --git a/arch/arm/mach-stixxxx/Kconfig b/arch/arm/mach-stixxxx/Kconfig
index df0aff2..3e93711 100644
--- a/arch/arm/mach-stixxxx/Kconfig
+++ b/arch/arm/mach-stixxxx/Kconfig
@@ -33,4 +33,13 @@ config SOC_STIH415
and other digital audio/video applications using Flattned Device
Trees.
+config SOC_STIH416
+ bool "STiH416 STMicroelectronics Consumer Electronics family"
+ default y
+ help
+ This enables support for STMicroelectronics Digital Consumer
+ Electronics family StiH416 parts, primarily targetted at set-top-box
+ and other digital audio/video applications using Flattened Device
+ Trees.
+
endif
diff --git a/arch/arm/mach-stixxxx/board-dt.c b/arch/arm/mach-stixxxx/board-dt.c
index 9c5addd..6487a12 100644
--- a/arch/arm/mach-stixxxx/board-dt.c
+++ b/arch/arm/mach-stixxxx/board-dt.c
@@ -37,10 +37,11 @@ static void __init stih41x_timer_init(void)
static const char *stih41x_dt_match[] __initdata = {
"st,stih415",
+ "st,stih416",
NULL
};
-DT_MACHINE_START(STM, "STiH415 SoC with Flattened Device Tree")
+DT_MACHINE_START(STM, "STiH415/416 SoC with Flattened Device Tree")
.init_time = stih41x_timer_init,
.smp = smp_ops(stixxxx_smp_ops),
.dt_compat = stih41x_dt_match,
--
1.7.6.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
