From: Wei WANG <wei_w...@realsil.com.cn>
These actions are individual for each reader model, so should be put in
extra_init_hw instead of rtsx_pci_init_hw.
Signed-off-by: Wei WANG <wei_w...@realsil.com.cn>
---
drivers/mfd/rts5209.c | 4 ++++
drivers/mfd/rts5227.c | 2 ++
drivers/mfd/rts5229.c | 4 ++++
drivers/mfd/rts5249.c | 2 ++
drivers/mfd/rtsx_pcr.c | 4 ----
5 files changed, 12 insertions(+), 4 deletions(-)
diff --git a/drivers/mfd/rts5209.c b/drivers/mfd/rts5209.c
index 49360d1..eed8b18 100644
--- a/drivers/mfd/rts5209.c
+++ b/drivers/mfd/rts5209.c
@@ -67,6 +67,10 @@ static int rts5209_extra_init_hw(struct rtsx_pcr *pcr)
/* Turn off LED */
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_GPIO, 0xFF, 0x03);
+ /* Reset ASPM state to default value */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, ASPM_FORCE_CTL, 0x3F, 0);
+ /* Force CLKREQ# PIN to drive 0 to request clock */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG, 0x08, 0x08);
/* Configure GPIO as output */
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_GPIO_DIR, 0xFF, 0x03);
/* Configure driving */
diff --git a/drivers/mfd/rts5227.c b/drivers/mfd/rts5227.c
index 4fe9ed1..fa4bf80 100644
--- a/drivers/mfd/rts5227.c
+++ b/drivers/mfd/rts5227.c
@@ -98,6 +98,8 @@ static int rts5227_extra_init_hw(struct rtsx_pcr *pcr)
/* Configure GPIO as output */
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, GPIO_CTL, 0x02, 0x02);
+ /* Reset ASPM state to default value */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, ASPM_FORCE_CTL, 0x3F, 0);
/* Switch LDO3318 source from DV33 to card_3v3 */
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x00);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x01);
diff --git a/drivers/mfd/rts5229.c b/drivers/mfd/rts5229.c
index da9fcc7..549a1bd 100644
--- a/drivers/mfd/rts5229.c
+++ b/drivers/mfd/rts5229.c
@@ -64,6 +64,10 @@ static int rts5229_extra_init_hw(struct rtsx_pcr *pcr)
/* Configure GPIO as output */
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, GPIO_CTL, 0x02, 0x02);
+ /* Reset ASPM state to default value */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, ASPM_FORCE_CTL, 0x3F, 0);
+ /* Force CLKREQ# PIN to drive 0 to request clock */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG, 0x08, 0x08);
/* Switch LDO3318 source from DV33 to card_3v3 */
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x00);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x01);
diff --git a/drivers/mfd/rts5249.c b/drivers/mfd/rts5249.c
index 24683d1..3bf9296 100644
--- a/drivers/mfd/rts5249.c
+++ b/drivers/mfd/rts5249.c
@@ -103,6 +103,8 @@ static int rts5249_extra_init_hw(struct rtsx_pcr *pcr)
/* Configure GPIO as output */
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, GPIO_CTL, 0x02, 0x02);
+ /* Reset ASPM state to default value */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, ASPM_FORCE_CTL, 0x3F, 0);
/* Switch LDO3318 source from DV33 to card_3v3 */
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x00);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x01);
diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c
index f97d5a7..0ae5996 100644
--- a/drivers/mfd/rtsx_pcr.c
+++ b/drivers/mfd/rtsx_pcr.c
@@ -971,8 +971,6 @@ static int rtsx_pci_init_hw(struct rtsx_pcr *pcr)
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, HOST_SLEEP_STATE, 0x03, 0x00);
/* Disable card clock */
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_CLK_EN, 0x1E, 0);
- /* Reset ASPM state to default value */
- rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, ASPM_FORCE_CTL, 0x3F, 0);
/* Reset delink mode */
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CHANGE_LINK_STATE, 0x0A, 0);
/* Card driving select */
@@ -1002,8 +1000,6 @@ static int rtsx_pci_init_hw(struct rtsx_pcr *pcr)
* 0: ELBI interrupt flag[31:22] & [7:0] only can be write clear
*/
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, NFTS_TX_CTRL, 0x02, 0);
- /* Force CLKREQ# PIN to drive 0 to request clock */
- rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG, 0x08, 0x08);
err = rtsx_pci_send_cmd(pcr, 100);
if (err < 0)
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
