This patch adds dt entry for ahci sata controller and its
corresponding phy controller.phy node has been added w.r.t
new generic phy framework.
Changes since V2:
1.Used syscon interface to PMU handling.
2.Changed "sata-phy-i2c" to "exynos-sataphy-i2c".
Changes since V1:
1.Minor changes to node name convention.
2.Updated binding document.
Signed-off-by: Yuvaraj Kumar C D <yuvaraj...@samsung.com>
---
.../devicetree/bindings/ata/exynos-sata-phy.txt | 19 ++++++++++++++-----
.../devicetree/bindings/ata/exynos-sata.txt | 17 ++++++++++++-----
.../devicetree/bindings/ata/exynos_sataphy_i2c.txt | 12 ++++++++++++
arch/arm/boot/dts/exynos5250-arndale.dts | 9 ++++++++-
arch/arm/boot/dts/exynos5250-smdk5250.dts | 8 ++------
arch/arm/boot/dts/exynos5250.dtsi | 16 ++++++++++++----
6 files changed, 60 insertions(+), 21 deletions(-)
create mode 100644 Documentation/devicetree/bindings/ata/exynos_sataphy_i2c.txt
diff --git a/Documentation/devicetree/bindings/ata/exynos-sata-phy.txt
b/Documentation/devicetree/bindings/ata/exynos-sata-phy.txt
index 37824fa..a679e17 100644
--- a/Documentation/devicetree/bindings/ata/exynos-sata-phy.txt
+++ b/Documentation/devicetree/bindings/ata/exynos-sata-phy.txt
@@ -4,11 +4,20 @@ SATA PHY nodes are defined to describe on-chip SATA Physical
layer controllers.
Each SATA PHY controller should have its own node.
Required properties:
-- compatible : compatible list, contains "samsung,exynos5-sata-phy"
+- compatible : compatible list, contains "samsung,exynos5250-sata-phy"
- reg : <registers mapping>
Example:
- sata@ffe07000 {
- compatible = "samsung,exynos5-sata-phy";
- reg = <0xffe07000 0x1000>;
- };
+ sata_phy: sata-phy@12170000 {
+ compatible = "samsung,exynos5250-sata-phy";
+ reg = <0x12170000 0x1ff>;
+ clocks = <&clock 287>;
+ clock-names = "sata_phyctrl";
+ #phy-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ sataphy-pmu {
+ reg = <0x10040724 0x4>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/ata/exynos-sata.txt
b/Documentation/devicetree/bindings/ata/exynos-sata.txt
index 0849f10..918bff8 100644
--- a/Documentation/devicetree/bindings/ata/exynos-sata.txt
+++ b/Documentation/devicetree/bindings/ata/exynos-sata.txt
@@ -8,10 +8,17 @@ Required properties:
- interrupts : <interrupt mapping for SATA IRQ>
- reg : <registers mapping>
- samsung,sata-freq : <frequency in MHz>
+- phys : as mentioned in phy-bindings.txt
+- phy-names : as mentioned in phy-bindings.txt
Example:
- sata@ffe08000 {
- compatible = "samsung,exynos5-sata";
- reg = <0xffe08000 0x1000>;
- interrupts = <115>;
- };
+ sata@122f0000 {
+ compatible = "snps,dwc-ahci";
+ samsung,sata-freq = <66>;
+ reg = <0x122f0000 0x1ff>;
+ interrupts = <0 115 0>;
+ clocks = <&clock 277>, <&clock 143>;
+ clock-names = "sata", "sclk_sata";
+ phys = <&sata_phy>;
+ phy-names = "sata-phy";
+ };
diff --git a/Documentation/devicetree/bindings/ata/exynos_sataphy_i2c.txt
b/Documentation/devicetree/bindings/ata/exynos_sataphy_i2c.txt
new file mode 100644
index 0000000..deabba9
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/exynos_sataphy_i2c.txt
@@ -0,0 +1,12 @@
+Device-Tree bindings for sataphy i2c client driver
+
+Required properties:
+compatible: Should be "samsung,exynos-sataphy-i2c"
+- reg: I2C address of the sataphy i2c device.
+
+Example:
+
+ sata-phy@38 {
+ compatible = "samsung,exynos-sataphy-i2c";
+ reg = <0x38>;
+ };
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts
b/arch/arm/boot/dts/exynos5250-arndale.dts
index b77a37e..dca74bb 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -381,7 +381,14 @@
};
i2c@121D0000 {
- status = "disabled";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <40000>;
+ samsung,i2c-slave-addr = <0x38>;
+
+ sata-phy@38 {
+ compatible = "samsung,exynos-sataphy-i2c";
+ reg = <0x38>;
+ };
};
mmc_0: mmc@12200000 {
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts
b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 13746df..b3c359a4 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -90,16 +90,12 @@
samsung,i2c-max-bus-freq = <40000>;
samsung,i2c-slave-addr = <0x38>;
- sata-phy {
- compatible = "samsung,sata-phy";
+ sata-phy@38 {
+ compatible = "samsung,exynos-sataphy-i2c";
reg = <0x38>;
};
};
- sata@122F0000 {
- samsung,sata-freq = <66>;
- };
-
i2c@12C80000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
diff --git a/arch/arm/boot/dts/exynos5250.dtsi
b/arch/arm/boot/dts/exynos5250.dtsi
index 5d5d3d0..5d4c8fa 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -46,6 +46,7 @@
i2c6 = &i2c_6;
i2c7 = &i2c_7;
i2c8 = &i2c_8;
+ i2c9 = &i2c_9;
pinctrl0 = &pinctrl_0;
pinctrl1 = &pinctrl_1;
pinctrl2 = &pinctrl_2;
@@ -229,16 +230,23 @@
};
sata@122F0000 {
- compatible = "samsung,exynos5-sata-ahci";
+ compatible = "snps,dwc-ahci";
+ samsung,sata-freq = <66>;
reg = <0x122F0000 0x1ff>;
interrupts = <0 115 0>;
clocks = <&clock 277>, <&clock 143>;
clock-names = "sata", "sclk_sata";
+ phys = <&sata_phy>;
+ phy-names = "sata-phy";
};
- sata-phy@12170000 {
- compatible = "samsung,exynos5-sata-phy";
+ sata_phy: sata-phy@12170000 {
+ compatible = "samsung,exynos5250-sata-phy";
reg = <0x12170000 0x1ff>;
+ clocks = <&clock 287>;
+ clock-names = "sata_phyctrl";
+ #phy-cells = <0>;
+ samsung,syscon-phandle = <&pmu_syscon>;
};
i2c_0: i2c@12C60000 {
@@ -347,7 +355,7 @@
clock-names = "i2c";
};
- i2c@121D0000 {
+ i2c_9: i2c@121D0000 {
compatible = "samsung,exynos5-sata-phy-i2c";
reg = <0x121D0000 0x100>;
#address-cells = <1>;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
