From: Fabio Estevam <[email protected]> Fix the 'VOLATGE' spell error.
Signed-off-by: Fabio Estevam <[email protected]> --- drivers/regulator/tps51632-regulator.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) diff --git a/drivers/regulator/tps51632-regulator.c b/drivers/regulator/tps51632-regulator.c index 3486be9..b3764f5 100644 --- a/drivers/regulator/tps51632-regulator.c +++ b/drivers/regulator/tps51632-regulator.c @@ -70,16 +70,16 @@ #define TPS51632_POWER_STATE_SINGLE_PHASE_CCM 0x1 #define TPS51632_POWER_STATE_SINGLE_PHASE_DCM 0x2 -#define TPS51632_MIN_VOLATGE 500000 -#define TPS51632_MAX_VOLATGE 1520000 -#define TPS51632_VOLATGE_STEP_10mV 10000 -#define TPS51632_VOLATGE_STEP_20mV 20000 +#define TPS51632_MIN_VOLTAGE 500000 +#define TPS51632_MAX_VOLTAGE 1520000 +#define TPS51632_VOLTAGE_STEP_10mV 10000 +#define TPS51632_VOLTAGE_STEP_20mV 20000 #define TPS51632_MAX_VSEL 0x7F #define TPS51632_MIN_VSEL 0x19 #define TPS51632_DEFAULT_RAMP_DELAY 6000 #define TPS51632_VOLT_VSEL(uV) \ - (DIV_ROUND_UP(uV - TPS51632_MIN_VOLATGE, \ - TPS51632_VOLATGE_STEP_10mV) + \ + (DIV_ROUND_UP(uV - TPS51632_MIN_VOLTAGE, \ + TPS51632_VOLTAGE_STEP_10mV) + \ TPS51632_MIN_VSEL) /* TPS51632 chip information */ @@ -243,9 +243,9 @@ static struct tps51632_regulator_platform_data * pdata->dvfs_step_20mV = of_property_read_bool(np, "ti,dvfs-step-20mV"); pdata->base_voltage_uV = pdata->reg_init_data->constraints.min_uV ? : - TPS51632_MIN_VOLATGE; + TPS51632_MIN_VOLTAGE; pdata->max_voltage_uV = pdata->reg_init_data->constraints.max_uV ? : - TPS51632_MAX_VOLATGE; + TPS51632_MAX_VOLTAGE; return pdata; } #else @@ -284,15 +284,15 @@ static int tps51632_probe(struct i2c_client *client, } if (pdata->enable_pwm_dvfs) { - if ((pdata->base_voltage_uV < TPS51632_MIN_VOLATGE) || - (pdata->base_voltage_uV > TPS51632_MAX_VOLATGE)) { + if ((pdata->base_voltage_uV < TPS51632_MIN_VOLTAGE) || + (pdata->base_voltage_uV > TPS51632_MAX_VOLTAGE)) { dev_err(&client->dev, "Invalid base_voltage_uV setting\n"); return -EINVAL; } if ((pdata->max_voltage_uV) && - ((pdata->max_voltage_uV < TPS51632_MIN_VOLATGE) || - (pdata->max_voltage_uV > TPS51632_MAX_VOLATGE))) { + ((pdata->max_voltage_uV < TPS51632_MIN_VOLTAGE) || + (pdata->max_voltage_uV > TPS51632_MAX_VOLTAGE))) { dev_err(&client->dev, "Invalid max_voltage_uV setting\n"); return -EINVAL; } @@ -308,8 +308,8 @@ static int tps51632_probe(struct i2c_client *client, tps->desc.name = client->name; tps->desc.id = 0; tps->desc.ramp_delay = TPS51632_DEFAULT_RAMP_DELAY; - tps->desc.min_uV = TPS51632_MIN_VOLATGE; - tps->desc.uV_step = TPS51632_VOLATGE_STEP_10mV; + tps->desc.min_uV = TPS51632_MIN_VOLTAGE; + tps->desc.uV_step = TPS51632_VOLTAGE_STEP_10mV; tps->desc.linear_min_sel = TPS51632_MIN_VSEL; tps->desc.n_voltages = TPS51632_MAX_VSEL + 1; tps->desc.ops = &tps51632_dcdc_ops; -- 1.8.1.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
