You know, after seeing that patch, that it just makes sense to add some of those cleanups to the lm80 driver.
Shawn. lm80-i2c-0-28 Adapter: SMBus PIIX4 adapter at fe00 +5V: +4.90 V (min = +4.74 V, max = +5.25 V) VTT: +1.72 V (min = +1.70 V, max = +2.10 V) +3.3V: +3.35 V (min = +3.14 V, max = +3.47 V) +Vcore: +1.98 V (min = +1.90 V, max = +2.10 V) +12V: +11.30 V (min = +11.18 V, max = +12.63 V) -12V: -11.88 V (min = -12.60 V, max = -11.39 V) -5V: -4.92 V (min = -5.25 V, max = -4.76 V) fan1: 1679 RPM (min = 1328 RPM, div = 4) temp: +32.38°C (hot: limit = +60°C, hyst = +65°C) : (os: limit = +54°C, hyst = +56°C) Driver works with changes applied. Signed-off-by: Aurelien Jarno <[EMAIL PROTECTED]> Signed-off-by: Shawn Starr <[EMAIL PROTECTED]> --- linux-2.6.11-rc2/drivers/i2c/chips/lm80.c 2005-01-26 02:04:38.000000000 -0500 +++ linux-2.6.11-rc2-fixes/drivers/i2c/chips/lm80.c 2005-01-26 02:41:00.000000000 -0500 @@ -72,7 +72,7 @@ SENSORS_INSMOD_1(lm80); static inline unsigned char FAN_TO_REG(unsigned rpm, unsigned div) { - if (rpm == 0) + if (rpm <= 0) return 255; rpm = SENSORS_LIMIT(rpm, 1, 1000000); return SENSORS_LIMIT((1350000 + rpm*div / 2) / (rpm*div), 1, 254); @@ -99,10 +99,7 @@ static inline long TEMP_FROM_REG(u16 tem #define TEMP_LIMIT_TO_REG(val) SENSORS_LIMIT((val)<0?\ ((val)-500)/1000:((val)+500)/1000,0,255) -#define ALARMS_FROM_REG(val) (val) - #define DIV_FROM_REG(val) (1 << (val)) -#define DIV_TO_REG(val) ((val)==8?3:(val)==4?2:(val)==1?0:1) /* * Client data (each client gets its own) @@ -269,7 +266,17 @@ static ssize_t set_fan_div(struct device DIV_FROM_REG(data->fan_div[nr])); val = simple_strtoul(buf, NULL, 10); - data->fan_div[nr] = DIV_TO_REG(val); + + switch (val) { + case 1: data->fan_div[nr] = 0; break; + case 2: data->fan_div[nr] = 1; break; + case 4: data->fan_div[nr] = 2; break; + case 8: data->fan_div[nr] = 3; break; + default: + dev_err(&client->dev, "fan_div value %ld not " + "supported. Choose one of 1, 2, 4 or 8!\n", val); + return -EINVAL; + } reg = (lm80_read_value(client, LM80_REG_FANDIV) & ~(3 << (2 * (nr + 1)))) | (data->fan_div[nr] << (2 * (nr + 1))); @@ -327,7 +334,7 @@ set_temp(os_hyst, temp_os_hyst, LM80_REG static ssize_t show_alarms(struct device *dev, char *buf) { struct lm80_data *data = lm80_update_device(dev); - return sprintf(buf, "%d\n", ALARMS_FROM_REG(data->alarms)); + return sprintf(buf, "%u\n", data->alarms); } static DEVICE_ATTR(in0_min, S_IWUSR | S_IRUGO, show_in_min0, set_in_min0); - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/