On 09/01/2014 13:31, Jean-Jacques Hiblot :
> This patch implements a simple DTS to boot a at91sam9261ek with a dt-enabled
> kernel (at91_dt_defconfig).
> Only dbgu, nand and watchdog are described in the DT.
>
> Signed-off-by: Jean-Jacques Hiblot <[email protected]>
> ---
> arch/arm/boot/dts/Makefile | 2 +
> arch/arm/boot/dts/at91sam9261ek.dts | 75
> +++++++++++++++++++++++++++++++++++++
> 2 files changed, 77 insertions(+)
> create mode 100644 arch/arm/boot/dts/at91sam9261ek.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 772a30e..ece523d 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -11,6 +11,8 @@ dtb-$(CONFIG_ARCH_AT91) += ethernut5.dtb
> dtb-$(CONFIG_ARCH_AT91) += evk-pro3.dtb
> dtb-$(CONFIG_ARCH_AT91) += tny_a9260.dtb
> dtb-$(CONFIG_ARCH_AT91) += usb_a9260.dtb
> +# sam9261
> +dtb-$(CONFIG_ARCH_AT91) += at91sam9261ek.dtb
> # sam9263
> dtb-$(CONFIG_ARCH_AT91) += at91sam9263ek.dtb
> dtb-$(CONFIG_ARCH_AT91) += tny_a9263.dtb
> diff --git a/arch/arm/boot/dts/at91sam9261ek.dts
> b/arch/arm/boot/dts/at91sam9261ek.dts
> new file mode 100644
> index 0000000..f3d22a9
> --- /dev/null
> +++ b/arch/arm/boot/dts/at91sam9261ek.dts
> @@ -0,0 +1,75 @@
> +/*
> + * at91sam9261ek.dts - Device Tree file for Atmel at91sam9261 reference board
> + *
> + * Copyright (C) 2013 Jean-Jacques Hiblot <[email protected]>
> + *
> + * Licensed under GPLv2 only.
> + */
> +/dts-v1/;
> +#include "at91sam9261.dtsi"
> +
> +/ {
> + model = "Atmel at91sam9261ek";
> + compatible = "atmel,at91sam9261ek", "atmel,at91sam9261",
> "atmel,at91sam9";
> +
> + chosen {
> + bootargs = "mem=64M console=ttyS0,115200";
No "mem=" argument, please.
> + };
> +
> + memory {
> + reg = <0x20000000 0x4000000>;
This is where memory is specified.
> + };
> +
> + clocks {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + main_clock: clock@0 {
> + compatible = "atmel,osc", "fixed-clock";
> + clock-frequency = <18432000>;
> + };
> + };
> +
> + ahb {
> + apb {
> + dbgu: serial@fffff200 {
> + status = "okay";
> + };
> +
> + watchdog@fffffd40 {
> + status = "okay";
> + };
> + };
> +
> + nand0: nand@40000000 {
> + nand-bus-width = <8>;
> + nand-ecc-mode = "soft";
> + nand-on-flash-bbt = <1>;
> + status = "okay";
> + at91bootstrap@0 {
> + label = "at91bootstrap";
> + reg = <0x0 0x20000>;
Maybe more partitions are needed by default. You may need to align to
the common partition scheme the we use for sama5d3 and:
http://www.at91.com/linux4sam/bin/view/Linux4SAM/GettingStarted#Linux4SAM_NandFlash_demo_Memory
(even if it can be discussed ;-))
> + };
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> + ds8 {
> + label = "ds8";
> + gpios = <&pioA 13 GPIO_ACTIVE_LOW>;
> + linux,default-trigger = "none";
> + };
> + ds7 {
> + label = "ds7";
> + gpios = <&pioA 14 GPIO_ACTIVE_LOW>;
> + linux,default-trigger = "nand-disk";
> + };
> + ds1 {
> + label = "ds1";
> + gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
> + linux,default-trigger = "heartbeat";
> + };
> + };
> +};
>
--
Nicolas Ferre
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
