Add support for MEN 16z188 ADC IP Core on MCB FPGAs.
Signed-off-by: Johannes Thumshirn <johannes.thumsh...@men.de>
---
drivers/iio/adc/Kconfig | 10 +++
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/men_z188_adc.c | 172 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 183 insertions(+)
create mode 100644 drivers/iio/adc/men_z188_adc.c
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 2209f28..5209437 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -204,4 +204,14 @@ config VIPERBOARD_ADC
Say yes here to access the ADC part of the Nano River
Technologies Viperboard.
+config MEN_Z188_ADC
+ tristate "MEN 16z188 ADC IP Core support"
+ depends on MCB
+ help
+ Say yes here to access support the MEN 16z188 ADC IP-Core on a MCB
+ carrier.
+
+ This driver can also be built as a module. If so, the module will be
+ called men_z188_adc.
+
endmenu
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index ba9a10a..1584391 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -22,3 +22,4 @@ obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o
obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o
obj-$(CONFIG_TWL6030_GPADC) += twl6030-gpadc.o
obj-$(CONFIG_VIPERBOARD_ADC) += viperboard_adc.o
+obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o
diff --git a/drivers/iio/adc/men_z188_adc.c b/drivers/iio/adc/men_z188_adc.c
new file mode 100644
index 0000000..8bc66cf
--- /dev/null
+++ b/drivers/iio/adc/men_z188_adc.c
@@ -0,0 +1,172 @@
+/*
+ * MEN 16z188 Analoge to Digial Converter
+ *
+ * Copyright (C) 2014 MEN Mikroelektronik GmbH (www.men.de)
+ * Author: Johannes Thumshirn <johannes.thumsh...@men.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; version 2 of the License.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mcb.h>
+#include <linux/iio/iio.h>
+
+#define Z188_ADC_MAX_CHAN 8
+#define Z188_ADC_GAIN 0x0700000
+#define Z188_MODE_VOLTAGE BIT(27)
+#define Z188_CFG_AUTO 0x1
+#define Z188_CTRL_REG 0x40
+
+#define ADC_DATA(x) (((x) >> 2) & 0x7ffffc)
+#define ADC_OVR(x) ((x) & 0x1)
+
+struct z188_adc {
+ struct resource *mem;
+ void __iomem *base;
+};
+
+#define Z188_ADC_CHANNEL(idx) { \
+ .type = IIO_VOLTAGE, \
+ .indexed = 1, \
+ .channel = (idx), \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+}
+
+static struct iio_chan_spec z188_adc_iio_channels[] = {
+ Z188_ADC_CHANNEL(0),
+ Z188_ADC_CHANNEL(1),
+ Z188_ADC_CHANNEL(2),
+ Z188_ADC_CHANNEL(3),
+ Z188_ADC_CHANNEL(4),
+ Z188_ADC_CHANNEL(5),
+ Z188_ADC_CHANNEL(6),
+ Z188_ADC_CHANNEL(7),
+};
+
+static int z188_iio_read_raw(struct iio_dev *iio_dev,
+ struct iio_chan_spec const *chan,
+ int *val,
+ int *val2,
+ long info)
+{
+ struct z188_adc *adc = iio_priv(iio_dev);
+ int ret = 0;
+ u16 tmp = 0;
+
+
+ switch (info) {
+ case IIO_CHAN_INFO_RAW:
+ tmp = readw(adc->base + chan->channel * 4);
+
+ if (ADC_OVR(tmp)) {
+ dev_info(&iio_dev->dev,
+ "Oversampling error on ADC channel %d\n",
+ chan->channel);
+ return -EIO;
+ }
+ *val = ADC_DATA(tmp);
+ ret = IIO_VAL_INT;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+static struct iio_info z188_adc_info = {
+ .read_raw = &z188_iio_read_raw,
+ .driver_module = THIS_MODULE,
+};
+
+static void men_z188_config_channels(void __iomem *addr)
+{
+ int i;
+ u32 cfg;
+ u32 ctl;
+
+ ctl = readl(addr + Z188_CTRL_REG);
+ ctl |= Z188_CFG_AUTO;
+ writel(ctl, addr + Z188_CTRL_REG);
+
+ for (i = 0; i < Z188_ADC_MAX_CHAN; i++) {
+ cfg = readl(addr + i);
+ cfg &= ~Z188_ADC_GAIN;
+ cfg |= Z188_MODE_VOLTAGE;
+ writel(cfg, addr + i);
+ }
+}
+
+static int men_z188_probe(struct mcb_device *dev,
+ const struct mcb_device_id *id)
+{
+ struct z188_adc *adc;
+ struct iio_dev *indio_dev;
+ struct resource *mem;
+
+ indio_dev = devm_iio_device_alloc(&dev->dev, sizeof(struct z188_adc));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ adc = iio_priv(indio_dev);
+ indio_dev->name = "z188-adc";
+ indio_dev->dev.parent = &dev->dev;
+ indio_dev->info = &z188_adc_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = z188_adc_iio_channels;
+ indio_dev->num_channels = ARRAY_SIZE(z188_adc_iio_channels);
+
+ mem = mcb_request_mem(dev, "z188-adc");
+ if (!mem)
+ return -ENOMEM;
+
+ adc->base = ioremap(mem->start, resource_size(mem));
+ if (adc->base == NULL)
+ goto err;
+
+ men_z188_config_channels(adc->base);
+
+ adc->mem = mem;
+ mcb_set_drvdata(dev, indio_dev);
+
+ return devm_iio_device_register(&dev->dev, indio_dev);
+
+err:
+ mcb_release_mem(mem);
+ return -ENXIO;
+}
+
+static void men_z188_remove(struct mcb_device *dev)
+{
+ struct iio_dev *indio_dev = mcb_get_drvdata(dev);
+ struct z188_adc *adc = iio_priv(indio_dev);
+
+ iounmap(adc->base);
+ mcb_release_mem(adc->mem);
+
+ mcb_set_drvdata(dev, NULL);
+}
+
+static struct mcb_device_id men_z188_ids[] = {
+ { .device = 0xbc },
+};
+MODULE_DEVICE_TABLE(mcb, men_z188_ids);
+
+static struct mcb_driver men_z188_driver = {
+ .driver = {
+ .name = "z188-adc",
+ .owner = THIS_MODULE,
+ },
+ .probe = men_z188_probe,
+ .remove = men_z188_remove,
+ .id_table = men_z188_ids,
+};
+module_mcb_driver(men_z188_driver);
+
+MODULE_AUTHOR("Johannes Thumshirn <johannes.thumsh...@men.de>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("IIO ADC driver for MEN 16z188 ADC Core");
+MODULE_ALIAS("mcb:16z188");
--
1.8.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
