Marvell Dove's pinctrl does require some PMU regs for muxing PMU functions to MPP pins. Recently, a discussion started about consolidating Power Management Unit (PMU) into a single DT node. As we don't want anymore DT ABI in the way, drop the corresponding reg property from pinctrl node now. The driver will derive the registers from existing reg properties.
Signed-off-by: Sebastian Hesselbarth <[email protected]> --- Cc: Rob Herring <[email protected]> Cc: Pawel Moll <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Ian Campbell <[email protected]> Cc: Kumar Gala <[email protected]> Cc: Russell King <[email protected]> Cc: Jason Cooper <[email protected]> Cc: Andrew Lunn <[email protected]> Cc: Gregory Clement <[email protected]> Cc: Linus Walleij <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] --- arch/arm/boot/dts/dove.dtsi | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index b6fc27f8ed66..3b891dd20993 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -395,8 +395,7 @@ pinctrl: pin-ctrl@d0200 { compatible = "marvell,dove-pinctrl"; reg = <0xd0200 0x14>, - <0xd0440 0x04>, - <0xd802c 0x08>; + <0xd0440 0x04>; clocks = <&gate_clk 22>; pmx_gpio_0: pmx-gpio-0 { -- 1.8.5.3 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
