This patch use ADC to get the temperature of SoC/battery by using NTC thermistor
driver in hwmon. NTC thermistor driver covnvert ADC's raw data to temperature
by using following variables:
- pullup-uv : Voltage
- pullup-ohm : Pull-up resistance
- pulldown-ohm : Pull-down resistance
- io-channels : It means ADC channel.
Signed-off-by: Chanwoo Choi <cw00.c...@samsung.com>
---
arch/arm/boot/dts/exynos4412-trats2.dts | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts
b/arch/arm/boot/dts/exynos4412-trats2.dts
index 4f851cc..fc517c3 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -106,6 +106,27 @@
};
};
+ adc: adc@126C0000 {
+ vdd-supply = <&ldo3_reg>;
+ status = "okay";
+
+ ncp15wb473@0 {
+ compatible = "ntc,ncp15wb473";
+ pullup-uv = <1800000>; /* VCC_1.8V_AP */
+ pullup-ohm = <100000>; /* 100K */
+ pulldown-ohm = <100000>; /* 100K */
+ io-channels = <&adc 1>; /* AP temperature */
+ };
+
+ ncp15wb473@1 {
+ compatible = "ntc,ncp15wb473";
+ pullup-uv = <1800000>; /* VCC_1.8V_AP */
+ pullup-ohm = <100000>; /* 100K */
+ pulldown-ohm = <100000>; /* 100K */
+ io-channels = <&adc 2>; /* Battery temperature */
+ };
+ };
+
i2c@13890000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-slave-addr = <0x10>;
--
1.8.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
