Enable the XHCI host controller and XUSB PHY on Venice2. All three
USB2.0 ports are owned by the XHCI controller and the two SuperSpeed
ports are mapped to the external USB2.0 ports.
Signed-off-by: Andrew Bresticker <abres...@chromium.org>
---
arch/arm/boot/dts/tegra124-venice2.dts | 46 ++++++++++++++--------------------
1 file changed, 19 insertions(+), 27 deletions(-)
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts
b/arch/arm/boot/dts/tegra124-venice2.dts
index f0bb842..dcfc0c7 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -940,6 +940,25 @@
nvidia,sys-clock-req-active-high;
};
+ usb@0,70090000 {
+ status = "okay";
+ s1p05v-supply = <&vdd_1v05_run>;
+ s3p3v-supply = <&vdd_3v3_lp0>;
+ s1p8v-supply = <&vddio_1v8>;
+ };
+
+ phy@0,7009f000 {
+ status = "okay";
+ nvidia,ss-pads = <0x3>;
+ nvidia,hsic-pads = <0x0>;
+ nvidia,utmi-pads = <0x7>;
+ nvidia,ss-port0-map = <0>;
+ nvidia,ss-port1-map = <2>;
+ vbus1-supply = <&vdd_usb1_vbus>;
+ vbus2-supply = <&vdd_run_cam>;
+ vbus3-supply = <&vdd_usb3_vbus>;
+ };
+
sdhci@0,700b0400 {
cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
@@ -960,33 +979,6 @@
};
};
- usb@0,7d000000 {
- status = "okay";
- };
-
- usb-phy@0,7d000000 {
- status = "okay";
- vbus-supply = <&vdd_usb1_vbus>;
- };
-
- usb@0,7d004000 {
- status = "okay";
- };
-
- usb-phy@0,7d004000 {
- status = "okay";
- vbus-supply = <&vdd_run_cam>;
- };
-
- usb@0,7d008000 {
- status = "okay";
- };
-
- usb-phy@0,7d008000 {
- status = "okay";
- vbus-supply = <&vdd_usb3_vbus>;
- };
-
backlight: backlight {
compatible = "pwm-backlight";
--
1.9.1.423.g4596e3a
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
