The pll controller register set and device state control registers
include sets of registers with different purposes, so it's logically
to add syscon entry to be able to access them from appropriate places.
So added pll controller and device state control syscon entries.
The keystone driver requires the next additional properties:
"ti,syscon-pll" - phandle/offset pair. The phandle to syscon used to
access pll controller registers and the offset to use
reset control registers.
"ti,syscon-dev" - phandle/offset pair. The phandle to syscon used to
access device state control registers and the offset
in order to use mux block registers for all watchdogs.
"ti,wdt_list" - option to declare what watchdogs are used to reboot
the SoC, so set "0" WDT as default.
Reviewed-by: Arnd Bergmann <a...@arndb.de>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronz...@ti.com>
---
arch/arm/boot/dts/keystone.dtsi | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index d9f99e7..b05def6 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -66,9 +66,21 @@
ranges = <0x0 0x0 0x0 0xc0000000>;
dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>;
+ pllctrl: pll-controller@02310000 {
+ compatible = "ti,keystone-pllctrl", "syscon";
+ reg = <0x02310000 0x200>;
+ };
+
+ devctrl: device-state-control@02620000 {
+ compatible = "ti,keystone-devctrl", "syscon";
+ reg = <0x02620000 0x1000>;
+ };
+
rstctrl: reset-controller {
compatible = "ti,keystone-reset";
- reg = <0x023100e8 4>; /* pll reset control reg */
+ ti,syscon-pll = <&pllctrl 0xe4>;
+ ti,syscon-dev = <&devctrl 0x328>;
+ ti,wdt_list = <0>;
};
/include/ "keystone-clocks.dtsi"
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
