Currently (at least) the dell-rbu driver selects FW_LOADER_USER_HELPER,
which means that distros can't really stop loading firmware through udev
without breaking other users (though some have).
Ideally we would remove/disable the udev firmware helper in both the kernel
and in udev, but if we were to disable it in udev and not the kernel, the result
would be (seemingly) hung kernels as no one would be around to cancel firmware
requests.
This patch allows udev firmware loading to be disabled while still allowing
non-udev firmware loading, as done by the dell-rbu driver, to continue
working. This is achieved by only using the fallback mechanism when the
uevent is suppressed.
Tested with
FW_LOADER_USER_HELPER=n
LATTICE_ECP3_CONFIG=y
DELL_RBU=y
and udev without the firmware loading support, but I don't have the hardware
to test the lattice/dell drivers, so additional testing would be appreciated.
Signed-off-by: Tom Gundersen <[email protected]>
Cc: Ming Lei <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Abhay Salunke <[email protected]>
Cc: Stefan Roese <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Kay Sievers <[email protected]>
---
drivers/base/Kconfig | 10 +++++++++-
drivers/base/firmware_class.c | 34 +++++++++++++++++++++++-----------
drivers/firmware/Kconfig | 2 +-
drivers/misc/Kconfig | 1 +
include/linux/firmware.h | 2 +-
5 files changed, 35 insertions(+), 14 deletions(-)
diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig
index 8fa8dea..28334ac 100644
--- a/drivers/base/Kconfig
+++ b/drivers/base/Kconfig
@@ -143,16 +143,24 @@ config EXTRA_FIRMWARE_DIR
this option you can point it elsewhere, such as /lib/firmware/ or
some other directory containing the firmware files.
+config FW_LOADER_FALLBACK
+ bool
+ default n
+
config FW_LOADER_USER_HELPER
bool "Fallback user-helper invocation for firmware loading"
depends on FW_LOADER
+ select FW_LOADER_FALLBACK
default y
help
This option enables / disables the invocation of user-helper
(e.g. udev) for loading firmware files as a fallback after the
direct file loading in kernel fails. The user-mode helper is
no longer required unless you have a special firmware file that
- resides in a non-standard path.
+ resides in a non-standard path. Moreover, the udev support has
+ been deprecated upstream.
+
+ If you are unsure about this, say N here.
config DEBUG_DRIVER
bool "Driver Core verbose debug messages"
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index d276e33..260e8ec 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -99,7 +99,7 @@ static inline long firmware_loading_timeout(void)
/* firmware behavior options */
#define FW_OPT_UEVENT (1U << 0)
#define FW_OPT_NOWAIT (1U << 1)
-#ifdef CONFIG_FW_LOADER_USER_HELPER
+#ifdef CONFIG_FW_LOADER_FALLBACK
#define FW_OPT_FALLBACK (1U << 2)
#else
#define FW_OPT_FALLBACK 0
@@ -135,7 +135,7 @@ struct firmware_buf {
unsigned long status;
void *data;
size_t size;
-#ifdef CONFIG_FW_LOADER_USER_HELPER
+#ifdef CONFIG_FW_LOADER_FALLBACK
bool is_paged_buf;
bool need_uevent;
struct page **pages;
@@ -183,7 +183,7 @@ static struct firmware_buf *__allocate_fw_buf(const char
*fw_name,
strcpy(buf->fw_id, fw_name);
buf->fwc = fwc;
init_completion(&buf->completion);
-#ifdef CONFIG_FW_LOADER_USER_HELPER
+#ifdef CONFIG_FW_LOADER_FALLBACK
INIT_LIST_HEAD(&buf->pending_list);
#endif
@@ -240,7 +240,7 @@ static void __fw_free_buf(struct kref *ref)
list_del(&buf->list);
spin_unlock(&fwc->lock);
-#ifdef CONFIG_FW_LOADER_USER_HELPER
+#ifdef CONFIG_FW_LOADER_FALLBACK
if (buf->is_paged_buf) {
int i;
vunmap(buf->data);
@@ -372,7 +372,7 @@ static void firmware_free_data(const struct firmware *fw)
static void fw_set_page_data(struct firmware_buf *buf, struct firmware *fw)
{
fw->priv = buf;
-#ifdef CONFIG_FW_LOADER_USER_HELPER
+#ifdef CONFIG_FW_LOADER_FALLBACK
fw->pages = buf->pages;
#endif
fw->size = buf->size;
@@ -443,7 +443,7 @@ static int fw_add_devm_name(struct device *dev, const char
*name)
/*
* user-mode helper code
*/
-#ifdef CONFIG_FW_LOADER_USER_HELPER
+#ifdef CONFIG_FW_LOADER_FALLBACK
struct firmware_priv {
struct delayed_work timeout_work;
bool nowait;
@@ -954,7 +954,7 @@ static void kill_requests_without_uevent(void)
}
#endif
-#else /* CONFIG_FW_LOADER_USER_HELPER */
+#else /* CONFIG_FW_LOADER_FALLBACK */
static inline int
fw_load_from_user_helper(struct firmware *firmware, const char *name,
struct device *device, unsigned int opt_flags,
@@ -970,7 +970,7 @@ fw_load_from_user_helper(struct firmware *firmware, const
char *name,
static inline void kill_requests_without_uevent(void) { }
#endif
-#endif /* CONFIG_FW_LOADER_USER_HELPER */
+#endif /* CONFIG_FW_LOADER_FALLBACK */
/* wait until the shared firmware_buf becomes ready (or error) */
@@ -1164,14 +1164,21 @@ request_firmware(const struct firmware **firmware_p,
const char *name,
/* Need to pin this module until return */
__module_get(THIS_MODULE);
+
+#ifdef CONFIG_FW_LOADER_USER_HELPER
ret = _request_firmware(firmware_p, name, device,
FW_OPT_UEVENT | FW_OPT_FALLBACK);
+#else
+ ret = _request_firmware(firmware_p, name, device,
+ FW_OPT_UEVENT);
+#endif
+
module_put(THIS_MODULE);
return ret;
}
EXPORT_SYMBOL(request_firmware);
-#ifdef CONFIG_FW_LOADER_USER_HELPER
+#ifdef CONFIG_FW_LOADER_FALLBACK
/**
* request_firmware: - load firmware directly without usermode helper
* @firmware_p: pointer to firmware image
@@ -1276,8 +1283,13 @@ request_firmware_nowait(
fw_work->device = device;
fw_work->context = context;
fw_work->cont = cont;
+#ifdef CONFIG_FW_LOADER_USER_HELPER
fw_work->opt_flags = FW_OPT_NOWAIT | FW_OPT_FALLBACK |
(uevent ? FW_OPT_UEVENT : 0);
+#else
+ fw_work->opt_flags = FW_OPT_NOWAIT |
+ (uevent ? FW_OPT_UEVENT : FW_OPT_FALLBACK);
+#endif
if (!try_module_get(module)) {
kfree(fw_work);
@@ -1648,7 +1660,7 @@ static void __init fw_cache_init(void)
static int __init firmware_class_init(void)
{
fw_cache_init();
-#ifdef CONFIG_FW_LOADER_USER_HELPER
+#ifdef CONFIG_FW_LOADER_FALLBACK
register_reboot_notifier(&fw_shutdown_nb);
return class_register(&firmware_class);
#else
@@ -1662,7 +1674,7 @@ static void __exit firmware_class_exit(void)
unregister_syscore_ops(&fw_syscore_ops);
unregister_pm_notifier(&fw_cache.pm_notify);
#endif
-#ifdef CONFIG_FW_LOADER_USER_HELPER
+#ifdef CONFIG_FW_LOADER_FALLBACK
unregister_reboot_notifier(&fw_shutdown_nb);
class_unregister(&firmware_class);
#endif
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index 4198388..d6c864e 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -64,7 +64,7 @@ config DELL_RBU
tristate "BIOS update support for DELL systems via sysfs"
depends on X86
select FW_LOADER
- select FW_LOADER_USER_HELPER
+ select FW_LOADER_FALLBACK
help
Say m if you want to have the option of updating the BIOS for your
DELL system. Note you need a Dell OpenManage or Dell Update package
(DUP)
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 8baff0e..2a3552e 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -499,6 +499,7 @@ config LATTICE_ECP3_CONFIG
tristate "Lattice ECP3 FPGA bitstream configuration via SPI"
depends on SPI && SYSFS
select FW_LOADER
+ select FW_LOADER_FALLBACK
default n
help
This option enables support for bitstream configuration (programming
diff --git a/include/linux/firmware.h b/include/linux/firmware.h
index 5952933..29c8914 100644
--- a/include/linux/firmware.h
+++ b/include/linux/firmware.h
@@ -68,7 +68,7 @@ static inline void release_firmware(const struct firmware *fw)
#endif
-#ifdef CONFIG_FW_LOADER_USER_HELPER
+#ifdef CONFIG_FW_LOADER_FALLBACK
int request_firmware_direct(const struct firmware **fw, const char *name,
struct device *device);
#else
--
1.9.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
