All the config option so far are depending on the POWER_RESET symbol
Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/power/reset/Kconfig | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index bdcf5173e377..19d546c5edfa 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -6,15 +6,17 @@ menuconfig POWER_RESET
Say Y here to enable board reset and power off
+if POWER_RESET
+
config POWER_RESET_AS3722
bool "ams AS3722 power-off driver"
- depends on MFD_AS3722 && POWER_RESET
+ depends on MFD_AS3722
help
This driver supports turning off board via a ams AS3722 power-off.
config POWER_RESET_AXXIA
bool "LSI Axxia reset driver"
- depends on POWER_RESET && ARCH_AXXIA
+ depends on ARCH_AXXIA
help
This driver supports restart for Axxia SoC.
@@ -22,7 +24,7 @@ config POWER_RESET_AXXIA
config POWER_RESET_GPIO
bool "GPIO power-off driver"
- depends on OF_GPIO && POWER_RESET
+ depends on OF_GPIO
help
This driver supports turning off your board via a GPIO line.
If your board needs a GPIO high/low to power down, say Y and
@@ -30,13 +32,13 @@ config POWER_RESET_GPIO
config POWER_RESET_MSM
bool "Qualcomm MSM power-off driver"
- depends on POWER_RESET && ARCH_QCOM
+ depends on ARCH_QCOM
help
Power off and restart support for Qualcomm boards.
config POWER_RESET_QNAP
bool "QNAP power-off driver"
- depends on OF_GPIO && POWER_RESET && PLAT_ORION
+ depends on OF_GPIO && PLAT_ORION
help
This driver supports turning off QNAP NAS devices by sending
commands to the microcontroller which controls the main power.
@@ -54,14 +56,13 @@ config POWER_RESET_RESTART
config POWER_RESET_SUN6I
bool "Allwinner A31 SoC reset driver"
depends on ARCH_SUNXI
- depends on POWER_RESET
help
Reboot support for the Allwinner A31 SoCs.
config POWER_RESET_VEXPRESS
bool "ARM Versatile Express power-off and reset driver"
depends on ARM || ARM64
- depends on POWER_RESET && VEXPRESS_CONFIG
+ depends on VEXPRESS_CONFIG
help
Power off and reset support for the ARM Ltd. Versatile
Express boards.
@@ -69,7 +70,6 @@ config POWER_RESET_VEXPRESS
config POWER_RESET_XGENE
bool "APM SoC X-Gene reset driver"
depends on ARM64
- depends on POWER_RESET
help
Reboot support for the APM SoC X-Gene Eval boards.
@@ -80,3 +80,4 @@ config POWER_RESET_KEYSTONE
help
Reboot support for the KEYSTONE SoCs.
+endif
--
2.0.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
