Hi, Got a problem here with the last few Linus -bk releases.
2.6.11-bk2 is running fine. 2.6.11-bk3 - 2.6.11-bk6 has the following problem: Everything is fine while the machine is booting. However as soon as X starts up the screen goes blank as normal but stays blank, no gdm login screen and the hard disk and floppy drive lights are on continuously. The machine is now locked up solid and needs a hard reset. I tried a serial console but get nothing after the kernel messages and the agetty login. The machine is question is an UP Athlon 1800+ XP with 768MB RAM, the graphics card is an AGP ATI Radeon 9200SE using the kernel AGP/DRM drivers and the Xorg radeon driver. It's running FC3. I've put 2.6.11-bk2 and 2.6.11-bk6 config's, dmesg's and an lspc -vv up on the web. http://digital-domain.net/kernel/2.6.11-bk2.config http://digital-domain.net/kernel/2.6.11-bk6.config http://digital-domain.net/kernel/2.6.11-bk2.dmesg http://digital-domain.net/kernel/2.6.11-bk6.dmesg http://digital-domain.net/kernel/lspci-vv When looking at this the other day I did get a message on the serial console after X started and the machine locked, about uhci host controller being disabled or something. Unfortunately I didn't make a note of it and didn't get it today for when I was preparing this report. Looking at the two dmesg's there is some difference in the usb messages. Anyway, thanks for your time and if you need any more info just let me know. Cheers, Andrew Clayton - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
