From: Opensource [Steve Twiss] <[email protected]> Add register definitions for DA9063 AD (0x3) silicon variant ID and Kconfig support to choose the silicon variant at compile time. This patch also adds RTC support for the AD silicon changes.
It adds AD support as a compile-time flag under a new menu item in Kconfig called 'Support DA9063 AD silicon variant ID'. This allows the user to choose AD support, or to leave blank and choose support for the newer silicon variant ID, but not both at the same time. This extra option for supporting AD will only appear if the main 'Dialog Semiconductor DA9063 PMIC Support' option is chosen. The AD support boolean will be defaulted to false (unchecked) until the user modifies it. This means that AD support is not turned on by default. The DA9063 probe function has been modified to use the compile time directive CONFIG_MFD_DA9063_AD. This configuration option will allow AD support only if this boolean is true, otherwise it will default to support BB (or greater) silicon. Signed-off-by: Opensource [Steve Twiss] <[email protected]> --- Checks performed with linux-next/v3.16-rc5/scripts/checkpatch.pl rtc-da9063.c total: 0 errors, 0 warnings, 367 lines checked da9063-core.c total: 0 errors, 0 warnings, 198 lines checked Kconfig total: 0 errors, 41 warnings, 1285 lines checked core.h total: 0 errors, 0 warnings, 98 lines checked registers.h total: 0 errors, 0 warnings, 1086 lines checked This patch adds DA9063 registers for silicon variant ID corresponding to AD (0x3) and adds RTC support for these register changes. The requirement add the AD register map back into the Linux kernel in order to support existing hardware was foreseen as a possible future change: https://lkml.org/lkml/2014/2/14/455 This patch applies against linux-next and v3.16-rc5 Regards, Steve Twiss, Dialog Semiconductor Ltd. drivers/mfd/Kconfig | 10 +++++++ drivers/mfd/da9063-core.c | 16 ++++++++-- drivers/rtc/rtc-da9063.c | 36 ++++++++++++++++++++++- include/linux/mfd/da9063/core.h | 3 +- include/linux/mfd/da9063/registers.h | 54 ++++++++++++++++++++++++++++++++++ 5 files changed, 114 insertions(+), 5 deletions(-) diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 6cc4b6a..7a86563 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -183,6 +183,16 @@ config MFD_DA9063 Additional drivers must be enabled in order to use the functionality of the device. +config MFD_DA9063_AD + bool "Support DA9063 AD silicon variant ID" + depends on MFD_DA9063 + help + This configures the DA9063 PMIC driver for use with AD silicon + variant ID. Saying yes here will remove the driver support for new + silicon variant IDs. + + Say N unless you know exactly what you are doing. + config MFD_MC13XXX tristate depends on (SPI_MASTER || I2C) diff --git a/drivers/mfd/da9063-core.c b/drivers/mfd/da9063-core.c index e70ae31..07b54ef 100644 --- a/drivers/mfd/da9063-core.c +++ b/drivers/mfd/da9063-core.c @@ -153,11 +153,21 @@ int da9063_device_init(struct da9063 *da9063, unsigned int irq) "Device detected (chip-ID: 0x%02X, var-ID: 0x%02X)\n", model, variant_id); - if (variant_code != PMIC_DA9063_BB) { - dev_err(da9063->dev, "Unknown chip variant code: 0x%02X\n", - variant_code); +#ifdef CONFIG_MFD_DA9063_AD + if (variant_code != PMIC_DA9063_AD) { + dev_err(da9063->dev, + "Only AD (0x3) silicon is supported in this configuration: 0x%02X\n", + variant_code); return -ENODEV; } +#else + if (variant_code < PMIC_DA9063_BB) { + dev_err(da9063->dev, + "Cannot support variant code < BB (0x5): 0x%02X\n", + variant_code); + return -ENODEV; + } +#endif da9063->model = model; da9063->variant_code = variant_code; diff --git a/drivers/rtc/rtc-da9063.c b/drivers/rtc/rtc-da9063.c index 5953930..66c3073 100644 --- a/drivers/rtc/rtc-da9063.c +++ b/drivers/rtc/rtc-da9063.c @@ -29,6 +29,10 @@ #define YEARS_FROM_DA9063(year) ((year) + 100) #define MONTHS_FROM_DA9063(month) ((month) - 1) +#ifdef CONFIG_MFD_DA9063_AD +#define RTC_ALARM_DATA_LEN (DA9063_REG_ALARM_Y - DA9063_REG_ALARM_MI + 1) +#endif + #define RTC_DATA_LEN (DA9063_REG_COUNT_Y - DA9063_REG_COUNT_S + 1) #define RTC_SEC 0 #define RTC_MIN 1 @@ -151,8 +155,14 @@ static int da9063_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) int ret; unsigned int val; +#ifdef CONFIG_MFD_DA9063_AD + data[RTC_SEC] = 0; + ret = regmap_bulk_read(rtc->hw->regmap, DA9063_REG_ALARM_MI, + &data[RTC_MIN], RTC_ALARM_DATA_LEN); +#else ret = regmap_bulk_read(rtc->hw->regmap, DA9063_REG_ALARM_S, &data[RTC_SEC], RTC_DATA_LEN); +#endif if (ret < 0) return ret; @@ -186,14 +196,20 @@ static int da9063_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) return ret; } +#ifdef CONFIG_MFD_DA9063_AD + data[RTC_SEC] = 0; + ret = regmap_bulk_write(rtc->hw->regmap, DA9063_REG_ALARM_MI, + &data[RTC_MIN], RTC_ALARM_DATA_LEN); +#else ret = regmap_bulk_write(rtc->hw->regmap, DA9063_REG_ALARM_S, data, RTC_DATA_LEN); +#endif if (ret < 0) { dev_err(dev, "Failed to write alarm: %d\n", ret); return ret; } - rtc->alarm_time = alrm->time; + da9063_data_to_tm(data, &rtc->alarm_time); if (alrm->enabled) { ret = da9063_rtc_start_alarm(dev); @@ -257,17 +273,29 @@ static int da9063_rtc_probe(struct platform_device *pdev) goto err; } +#ifdef CONFIG_MFD_DA9063_AD + ret = regmap_update_bits(da9063->regmap, DA9063_REG_ALARM_MI, + DA9063_ALARM_STATUS_TICK | DA9063_ALARM_STATUS_ALARM, + 0); +#else ret = regmap_update_bits(da9063->regmap, DA9063_REG_ALARM_S, DA9063_ALARM_STATUS_TICK | DA9063_ALARM_STATUS_ALARM, 0); +#endif if (ret < 0) { dev_err(&pdev->dev, "Failed to access RTC alarm register\n"); goto err; } +#ifdef CONFIG_MFD_DA9063_AD + ret = regmap_update_bits(da9063->regmap, DA9063_REG_ALARM_MI, + DA9063_ALARM_STATUS_ALARM, + DA9063_ALARM_STATUS_ALARM); +#else ret = regmap_update_bits(da9063->regmap, DA9063_REG_ALARM_S, DA9063_ALARM_STATUS_ALARM, DA9063_ALARM_STATUS_ALARM); +#endif if (ret < 0) { dev_err(&pdev->dev, "Failed to access RTC alarm register\n"); goto err; @@ -280,8 +308,14 @@ static int da9063_rtc_probe(struct platform_device *pdev) goto err; } +#ifdef CONFIG_MFD_DA9063_AD + data[RTC_SEC] = 0; + ret = regmap_bulk_read(da9063->regmap, DA9063_REG_ALARM_MI, + &data[RTC_MIN], RTC_ALARM_DATA_LEN); +#else ret = regmap_bulk_read(da9063->regmap, DA9063_REG_ALARM_S, data, RTC_DATA_LEN); +#endif if (ret < 0) { dev_err(&pdev->dev, "Failed to read initial alarm data: %d\n", ret); diff --git a/include/linux/mfd/da9063/core.h b/include/linux/mfd/da9063/core.h index 00a9aac..b92a326 100644 --- a/include/linux/mfd/da9063/core.h +++ b/include/linux/mfd/da9063/core.h @@ -34,7 +34,8 @@ enum da9063_models { }; enum da9063_variant_codes { - PMIC_DA9063_BB = 0x5 + PMIC_DA9063_AD = 0x3, + PMIC_DA9063_BB = 0x5, }; /* Interrupts */ diff --git a/include/linux/mfd/da9063/registers.h b/include/linux/mfd/da9063/registers.h index 09a85c6..e5201f9 100644 --- a/include/linux/mfd/da9063/registers.h +++ b/include/linux/mfd/da9063/registers.h @@ -104,6 +104,18 @@ #define DA9063_REG_COUNT_D 0x43 #define DA9063_REG_COUNT_MO 0x44 #define DA9063_REG_COUNT_Y 0x45 + +#ifdef CONFIG_MFD_DA9063_AD +#define DA9063_REG_ALARM_MI 0x46 +#define DA9063_REG_ALARM_H 0x47 +#define DA9063_REG_ALARM_D 0x48 +#define DA9063_REG_ALARM_MO 0x49 +#define DA9063_REG_ALARM_Y 0x4A +#define DA9063_REG_SECOND_A 0x4B +#define DA9063_REG_SECOND_B 0x4C +#define DA9063_REG_SECOND_C 0x4D +#define DA9063_REG_SECOND_D 0x4E +#else #define DA9063_REG_ALARM_S 0x46 #define DA9063_REG_ALARM_MI 0x47 #define DA9063_REG_ALARM_H 0x48 @@ -114,6 +126,7 @@ #define DA9063_REG_SECOND_B 0x4D #define DA9063_REG_SECOND_C 0x4E #define DA9063_REG_SECOND_D 0x4F +#endif /* Sequencer Control Registers */ #define DA9063_REG_SEQ 0x81 @@ -223,6 +236,38 @@ #define DA9063_REG_CONFIG_J 0x10F #define DA9063_REG_CONFIG_K 0x110 #define DA9063_REG_CONFIG_L 0x111 + +#ifdef CONFIG_MFD_DA9063_AD +#define DA9063_REG_MON_REG_1 0x112 +#define DA9063_REG_MON_REG_2 0x113 +#define DA9063_REG_MON_REG_3 0x114 +#define DA9063_REG_MON_REG_4 0x115 +#define DA9063_REG_MON_REG_5 0x116 +#define DA9063_REG_MON_REG_6 0x117 +#define DA9063_REG_TRIM_CLDR 0x118 + +/* General Purpose Registers */ +#define DA9063_REG_GP_ID_0 0x119 +#define DA9063_REG_GP_ID_1 0x11A +#define DA9063_REG_GP_ID_2 0x11B +#define DA9063_REG_GP_ID_3 0x11C +#define DA9063_REG_GP_ID_4 0x11D +#define DA9063_REG_GP_ID_5 0x11E +#define DA9063_REG_GP_ID_6 0x11F +#define DA9063_REG_GP_ID_7 0x120 +#define DA9063_REG_GP_ID_8 0x121 +#define DA9063_REG_GP_ID_9 0x122 +#define DA9063_REG_GP_ID_10 0x123 +#define DA9063_REG_GP_ID_11 0x124 +#define DA9063_REG_GP_ID_12 0x125 +#define DA9063_REG_GP_ID_13 0x126 +#define DA9063_REG_GP_ID_14 0x127 +#define DA9063_REG_GP_ID_15 0x128 +#define DA9063_REG_GP_ID_16 0x129 +#define DA9063_REG_GP_ID_17 0x12A +#define DA9063_REG_GP_ID_18 0x12B +#define DA9063_REG_GP_ID_19 0x12C +#else #define DA9063_REG_CONFIG_M 0x112 #define DA9063_REG_CONFIG_N 0x113 @@ -254,6 +299,7 @@ #define DA9063_REG_GP_ID_17 0x132 #define DA9063_REG_GP_ID_18 0x133 #define DA9063_REG_GP_ID_19 0x134 +#endif /* Chip ID and variant */ #define DA9063_REG_CHIP_ID 0x181 @@ -404,10 +450,14 @@ /* DA9063_REG_CONTROL_B (addr=0x0F) */ #define DA9063_CHG_SEL 0x01 #define DA9063_WATCHDOG_PD 0x02 +#ifndef CONFIG_MFD_DA9063_AD #define DA9063_RESET_BLINKING 0x04 +#endif #define DA9063_NRES_MODE 0x08 #define DA9063_NONKEY_LOCK 0x10 +#ifndef CONFIG_MFD_DA9063_AD #define DA9063_BUCK_SLOWSTART 0x80 +#endif /* DA9063_REG_CONTROL_C (addr=0x10) */ #define DA9063_DEBOUNCING_MASK 0x07 @@ -467,7 +517,9 @@ #define DA9063_GPADC_PAUSE 0x02 #define DA9063_PMIF_DIS 0x04 #define DA9063_HS2WIRE_DIS 0x08 +#ifndef CONFIG_MFD_DA9063_AD #define DA9063_CLDR_PAUSE 0x10 +#endif #define DA9063_BBAT_DIS 0x20 #define DA9063_OUT_32K_PAUSE 0x40 #define DA9063_PMCONT_DIS 0x80 @@ -843,8 +895,10 @@ #define DA9063_COUNT_YEAR_MASK 0x3F #define DA9063_MONITOR 0x40 +#ifndef CONFIG_MFD_DA9063_AD /* DA9063_REG_ALARM_S (addr=0x46) */ #define DA9063_ALARM_S_MASK 0x3F +#endif #define DA9063_ALARM_STATUS_ALARM 0x80 #define DA9063_ALARM_STATUS_TICK 0x40 /* DA9063_REG_ALARM_MI (addr=0x47) */ -- end-of-patch for RFC V1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
