Hi Russell,

On Wed, Jul 30, 2014 at 10:26:35AM +0100, Russell King wrote:
> On Mon, Jul 21, 2014 at 02:07:56PM -0700, Brian Norris wrote:
> > +static DEFINE_SPINLOCK(boot_lock);
> > +
> > +static void brcmstb_secondary_init(unsigned int cpu)
> > +{
> > +   /*
> > +    * Synchronise with the boot thread.
> > +    */
> > +   spin_lock(&boot_lock);
> > +   spin_unlock(&boot_lock);
> > +}
> > +
> > +static int brcmstb_boot_secondary(unsigned int cpu, struct task_struct 
> > *idle)
> > +{
> > +   /*
> > +    * set synchronisation state between this boot processor
> > +    * and the secondary one
> > +    */
> > +   spin_lock(&boot_lock);
> > +
> > +   /* Bring up power to the core if necessary */
> > +   if (brcmstb_cpu_get_power_state(cpu) == 0)
> > +           brcmstb_cpu_power_on(cpu);
> > +
> > +   brcmstb_cpu_boot(cpu);
> > +
> > +   /*
> > +    * now the secondary core is starting up let it run its
> > +    * calibrations, then wait for it to finish
> > +    */
> > +   spin_unlock(&boot_lock);
> 
> I've just read through this code (because it caused my allmodconfig to
> break) and spotted this.

Sorry about the allmodconfig problems. I never compile-tested with ARMv6
enabled. This look OK?

diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
index f3665121729b..5ce82b4ba931 100644
--- a/arch/arm/mach-bcm/Makefile
+++ b/arch/arm/mach-bcm/Makefile
@@ -32,6 +32,7 @@ obj-$(CONFIG_ARCH_BCM2835)    += board_bcm2835.o
 obj-$(CONFIG_ARCH_BCM_5301X)   += bcm_5301x.o
 
 ifeq ($(CONFIG_ARCH_BRCMSTB),y)
+CFLAGS_platsmp-brcmstb.o       += -march=armv7-a
 obj-y                          += brcmstb.o
 obj-$(CONFIG_SMP)              += headsmp-brcmstb.o platsmp-brcmstb.o
 endif

> What function does boot_lock perform here?  Please, don't quote the
> comments (I know where the comments came from) but what I want to hear
> is your comments about why you decided to retain this.

You might glean a little more from my response to Rob, but I'm not sure
there was a good reason for retaining this. We do need to be sure the
CPU is fully powered online before bringing it out of reset, but the
spinlock seems overkill AFAICT.

Brian
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to