Use runtime PM to keep the host active during I/O operations and other
requests which requires the tmio hardware to be powered.
Additionally make use of the runtime PM autosuspend feature with a
default timeout of 50 ms.
Signed-off-by: Ulf Hansson <ulf.hans...@linaro.org>
---
drivers/mmc/host/tmio_mmc_pio.c | 55 ++++++++++++++++++++++++-----------------
1 file changed, 32 insertions(+), 23 deletions(-)
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index 5c2e5a3..d63d292 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -144,7 +144,8 @@ static void tmio_mmc_enable_sdio_irq(struct mmc_host *mmc,
int enable)
sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0000);
host->sdio_irq_enabled = false;
- pm_runtime_put(mmc_dev(mmc));
+ pm_runtime_mark_last_busy(mmc_dev(mmc));
+ pm_runtime_put_autosuspend(mmc_dev(mmc));
}
}
@@ -252,6 +253,9 @@ static void tmio_mmc_reset_work(struct work_struct *work)
tmio_mmc_abort_dma(host);
mmc_request_done(host->mmc, mrq);
+
+ pm_runtime_mark_last_busy(mmc_dev(host->mmc));
+ pm_runtime_put_autosuspend(mmc_dev(host->mmc));
}
/* called with host->lock held, interrupts disabled */
@@ -281,6 +285,9 @@ static void tmio_mmc_finish_request(struct tmio_mmc_host
*host)
tmio_mmc_abort_dma(host);
mmc_request_done(host->mmc, mrq);
+
+ pm_runtime_mark_last_busy(mmc_dev(host->mmc));
+ pm_runtime_put_autosuspend(mmc_dev(host->mmc));
}
static void tmio_mmc_done_work(struct work_struct *work)
@@ -735,6 +742,8 @@ static void tmio_mmc_request(struct mmc_host *mmc, struct
mmc_request *mrq)
spin_unlock_irqrestore(&host->lock, flags);
+ pm_runtime_get_sync(mmc_dev(mmc));
+
if (mrq->data) {
ret = tmio_mmc_start_data(host, mrq->data);
if (ret)
@@ -753,6 +762,9 @@ fail:
host->mrq = NULL;
mrq->cmd->error = ret;
mmc_request_done(mmc, mrq);
+
+ pm_runtime_mark_last_busy(mmc_dev(mmc));
+ pm_runtime_put_autosuspend(mmc_dev(mmc));
}
static int tmio_mmc_clk_update(struct mmc_host *mmc)
@@ -831,6 +843,8 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct
mmc_ios *ios)
struct device *dev = &host->pdev->dev;
unsigned long flags;
+ pm_runtime_get_sync(mmc_dev(mmc));
+
mutex_lock(&host->ios_lock);
spin_lock_irqsave(&host->lock, flags);
@@ -866,7 +880,6 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct
mmc_ios *ios)
if (ios->power_mode == MMC_POWER_ON && ios->clock) {
if (host->power != TMIO_MMC_ON_RUN) {
tmio_mmc_clk_update(mmc);
- pm_runtime_get_sync(dev);
if (host->resuming) {
tmio_mmc_reset(host);
host->resuming = false;
@@ -896,7 +909,6 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct
mmc_ios *ios)
if (old_power == TMIO_MMC_ON_RUN) {
tmio_mmc_clk_stop(host);
- pm_runtime_put(dev);
if (pdata->clk_disable)
pdata->clk_disable(host->pdev);
}
@@ -923,6 +935,9 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct
mmc_ios *ios)
host->mrq = NULL;
mutex_unlock(&host->ios_lock);
+
+ pm_runtime_mark_last_busy(mmc_dev(mmc));
+ pm_runtime_put_autosuspend(mmc_dev(mmc));
}
static int tmio_mmc_get_ro(struct mmc_host *mmc)
@@ -933,8 +948,13 @@ static int tmio_mmc_get_ro(struct mmc_host *mmc)
if (ret >= 0)
return ret;
- return !((pdata->flags & TMIO_MMC_WRPROTECT_DISABLE) ||
- (sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT));
+ pm_runtime_get_sync(mmc_dev(mmc));
+ ret = !((pdata->flags & TMIO_MMC_WRPROTECT_DISABLE) ||
+ (sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT));
+ pm_runtime_mark_last_busy(mmc_dev(mmc));
+ pm_runtime_put_autosuspend(mmc_dev(mmc));
+
+ return ret;
}
static const struct mmc_host_ops tmio_mmc_ops = {
@@ -1040,27 +1060,14 @@ int tmio_mmc_host_probe(struct tmio_mmc_host **host,
mmc->slot.cd_irq >= 0);
_host->power = TMIO_MMC_OFF_STOP;
- pm_runtime_enable(&pdev->dev);
- ret = pm_runtime_resume(&pdev->dev);
- if (ret < 0)
- goto pm_disable;
-
if (tmio_mmc_clk_update(mmc) < 0) {
mmc->f_max = pdata->hclk;
mmc->f_min = mmc->f_max / 512;
}
/*
- * There are 4 different scenarios for the card detection:
- * 1) an external gpio irq handles the cd (best for power savings)
- * 2) internal sdhi irq handles the cd
- * 3) a worker thread polls the sdhi - indicated by MMC_CAP_NEEDS_POLL
- * 4) the medium is non-removable - indicated by MMC_CAP_NONREMOVABLE
- *
- * While we increment the runtime PM counter for all scenarios when
- * the mmc core activates us by calling an appropriate set_ios(), we
- * must additionally ensure that in case 2) the tmio mmc hardware stays
- * powered on during runtime for the card detection to work.
+ * While using internal tmio hardware logic for card detection, we need
+ * to ensure it stays powered for it to work.
*/
if (_host->native_hotplug)
pm_runtime_get_noresume(&pdev->dev);
@@ -1098,6 +1105,11 @@ int tmio_mmc_host_probe(struct tmio_mmc_host **host,
/* See if we also get DMA */
tmio_mmc_request_dma(_host, pdata);
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+
ret = mmc_add_host(mmc);
if (pdata->clk_disable)
pdata->clk_disable(pdev);
@@ -1120,9 +1132,6 @@ int tmio_mmc_host_probe(struct tmio_mmc_host **host,
return 0;
-pm_disable:
- pm_runtime_disable(&pdev->dev);
- iounmap(_host->ctl);
host_free:
mmc_free_host(mmc);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
