On 12/09/14 00:15, Jacob Pan wrote:
> More XPowers PMIC devices can be supported by extending this driver, so
> rename it to axp2xx to cover axp288 variant.
>
> Acked-by: Lee Jones <lee.jo...@linaro.org>
> Signed-off-by: Jacob Pan <jacob.jun....@linux.intel.com>
I'm not sure this rename is a good idea (or the original wild
card was for that matter).
For example, just a quick look at the xpowers website shows there is a AXP228
which just got swept up by the name change.
Best plan, in my view, is to always name a driver after an individual part it
supports and rely on Kconfig description to say what else is supported.
Bit late here, but perhaps best not to make things worse!
> ---
> drivers/mfd/Kconfig | 7 ++++---
> drivers/mfd/Makefile | 2 +-
> drivers/mfd/{axp20x.c => axp2xx.c} | 6 +++---
> include/linux/mfd/{axp20x.h => axp2xx.h} | 6 +++---
> 4 files changed, 11 insertions(+), 10 deletions(-)
> rename drivers/mfd/{axp20x.c => axp2xx.c} (97%)
> rename include/linux/mfd/{axp20x.h => axp2xx.h} (98%)
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index de5abf2..42a70a3 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -67,14 +67,15 @@ config MFD_BCM590XX
> help
> Support for the BCM590xx PMUs from Broadcom
>
> -config MFD_AXP20X
> - bool "X-Powers AXP20X"
> +config MFD_AXP2XX
> + bool "X-Powers AXP2XX"
> select MFD_CORE
> select REGMAP_I2C
> select REGMAP_IRQ
> depends on I2C=y
> help
> - If you say Y here you get support for the X-Powers AXP202 and AXP209.
> + If you say Y here you get support for the X-Powers AXP202, AXP209 and
> + AXP288 power management IC (PMIC).
> This driver include only the core APIs. You have to select individual
> components like regulators or the PEK (Power Enable Key) under the
> corresponding menus.
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 3fcfdfc..8d0beb2 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -103,7 +103,7 @@ obj-$(CONFIG_PMIC_DA9052) += da9052-irq.o
> obj-$(CONFIG_PMIC_DA9052) += da9052-core.o
> obj-$(CONFIG_MFD_DA9052_SPI) += da9052-spi.o
> obj-$(CONFIG_MFD_DA9052_I2C) += da9052-i2c.o
> -obj-$(CONFIG_MFD_AXP20X) += axp20x.o
> +obj-$(CONFIG_MFD_AXP2XX) += axp2xx.o
>
> obj-$(CONFIG_MFD_LP3943) += lp3943.o
> obj-$(CONFIG_MFD_LP8788) += lp8788.o lp8788-irq.o
> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp2xx.c
> similarity index 97%
> rename from drivers/mfd/axp20x.c
> rename to drivers/mfd/axp2xx.c
> index dee6539..332a8a0 100644
> --- a/drivers/mfd/axp20x.c
> +++ b/drivers/mfd/axp2xx.c
> @@ -1,7 +1,7 @@
> /*
> - * axp20x.c - MFD core driver for the X-Powers AXP202 and AXP209
> + * axp2xx.c - MFD core driver for the X-Powers AXP202 and AXP209
> *
> - * AXP20x comprises an adaptive USB-Compatible PWM charger, 2 BUCK DC-DC
> + * AXP2xx comprises an adaptive USB-Compatible PWM charger, 2 BUCK DC-DC
> * converters, 5 LDOs, multiple 12-bit ADCs of voltage, current and
> temperature
> * as well as 4 configurable GPIOs.
> *
> @@ -21,7 +21,7 @@
> #include <linux/regmap.h>
> #include <linux/slab.h>
> #include <linux/regulator/consumer.h>
> -#include <linux/mfd/axp20x.h>
> +#include <linux/mfd/axp2xx.h>
> #include <linux/mfd/core.h>
> #include <linux/of_device.h>
> #include <linux/of_irq.h>
> diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp2xx.h
> similarity index 98%
> rename from include/linux/mfd/axp20x.h
> rename to include/linux/mfd/axp2xx.h
> index d0e31a2..a36d91b 100644
> --- a/include/linux/mfd/axp20x.h
> +++ b/include/linux/mfd/axp2xx.h
> @@ -8,8 +8,8 @@
> * published by the Free Software Foundation.
> */
>
> -#ifndef __LINUX_MFD_AXP20X_H
> -#define __LINUX_MFD_AXP20X_H
> +#ifndef __LINUX_MFD_AXP2XX_H
> +#define __LINUX_MFD_AXP2XX_H
>
> enum {
> AXP202_ID = 0,
> @@ -177,4 +177,4 @@ struct axp20x_dev {
> long variant;
> };
>
> -#endif /* __LINUX_MFD_AXP20X_H */
> +#endif /* __LINUX_MFD_AXP2XX_H */
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
