From: Chun-Hao Lin <h...@realtek.com> Date: Tue, 7 Oct 2014 15:10:41 +0800
> RTL8168EP is Realtek PCIe Gigabit Ethernet controller with DASH support. > It is a successor chip of RTL8168DP. > > For RTL8168EP, the read/write ocp register is via eri channel type 2, so I > move ocp_xxx() related functions under rtl_eri_xxx. And use r8168dp_ocp_xxx() > for RTL8168DP ocp read/write, r8168ep_ocp_xxx() for RTL8168EP ocp read/write. > > The way of checking dash enable is different with RTL8168DP. I use > r8168dp_check_dash()for RTL8168DP and r8168ep_check_dash() for RTL8168EP, > to check if dash is enabled. > > The driver_start() and driver_stop() of RTL8168EP is also different with > RTL8168DP. I use rtl8168dp_driver_xxx() for RTL8168DP and > rtl8168ep_driver_xxx for RTL8168EP. > > Right now, RTL8168EP phy mcu did not need firmware code patch, so I did not > add firmware code for it. > so I did not add firmware code for it. > > Signed-off-by: Chun-Hao Lin <h...@realtek.com> I'll apply this, but if Francois has more feedback please work on it with follow-on changes. Thank you. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
