On Thu, Mar 31, 2005 at 09:54:33PM +0200, Maximilian Engelhardt wrote: > On Fri, 2005-03-18 at 15:50 +0100, Romano Giannetti wrote: > > > > It happens exactly the same on my laptop, sony vaio whose configuration is > > > > http://www.dea.icai.upco.es/romano/linux/vaio-conf/laptop-config.html > > I was able to get some logs using CONFIG_LP_CONSOLE (the first time I > ever saw "Back to C!"): > > Back to C! > PM: Finishing up. > ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 10 (level,low) -> IRQ 10 > MCE: The hardware reports a non fatal, correctable incident occurred on > CPU 0. > Bank 1: e200000000000001 > hda: task_out_intr: status=0x51 { DriveReady SeekComplete Error } > hda: task_out_intr: error=0x04 { DriveStatusError } > ide: failed opcode was: unknown > > keeps on always repeating last three messages until I reboot > > Full log: > http://home.daemonizer.de/resume.png > > kernel version is 2.6.11 > config: http://home.daemonizer.de/config-2.6.11-S3test > dmesg from booting: http://home.daemonizer.de/dmesg-2.6.11-S3test > lspci: http://home.daemonizer.de/lspci > Gentoo Base System version 1.6.10 > > Hardware: > Acer Travelmate 661lci (centrino) > Intel(R) Pentium(R) M processor 1400MHz
I tried with serial console. The only thing I get is: Stopping tasks: ================================================================================| and nothing more. Well, this was done with the double console, so that I will try again as soon as I have a bit of time with just the serial console on. But the "external" behaviour for me is like your: it stops, then at restart the HDD led stays on and nothing happen. Romano -- Romano Giannetti - Univ. Pontificia Comillas (Madrid, Spain) Electronic Engineer - phone +34 915 422 800 ext 2416 fax +34 915 596 569 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
